Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
What toilet flange to use?
[ 9 Answers ]
I am remodeling a bathroom in an old house. The floors are concrete, and right now there is just what looks to be a cast-iron waste line that runs up through the concrete for the toilet. The inside opening of the pipe is 3 1/2" in diameter. What flange do you recommend for this? I can only find 3"...
Toilet flange
[ 3 Answers ]
Hi, I'm putting a new floor in the bathroom. The tolet flange is higher by 1/4 in on one side and 1/2 in on the other above the floor I'm going to put ceramic tile down. Do I need to level it out or bring the floor up around the flange? Thanks Tim
Toilet flange
[ 1 Answers ]
I am installing tile in bathroom so the toilet flange is now about approx. 1/2" below the tile. Do I have to remove the toilet flange or are there extensions?
Toilet flange HELP!
[ 3 Answers ]
HI, I need some good professional advise. My toilet was leaking and I removed it to find that the toilet flange was broken on one side. The flange and lower pipe appear to be cast iron 4 inch. I must replace some of the damaged flooring but am at a loss as to how to remove the cast iron flange from...
Toilet flange
[ 5 Answers ]
I am in the process of re-settin my toilet, It is located in the basement and the toilet flange sits on top of the ceramic tile. It is not flush with the tile. I have reset the toilet three times using various thickness of wax. These only last so long. I have purchased a wax free bowl gasket... View more questions Search
|