Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Goodman furnace GMNT080-4 furnace runs good for a while then has to be manually reset
[ 5 Answers ]
I have a Goodman GMNT080-4 (90%). I'm having the same problem As Streatherg did back in the Nov 2006 question. I reviewed his article and tried Every thing on there but seems to be doing the same thing. The furnace kicks on for about an hour then locks out and has to be manually reset threw...
Goodman furnace induced draft motor
[ 3 Answers ]
On a call for heat the draft motor starts but the air proving switch does not close. I replaced it with the same result. Everything works normally if I close the switch manually with my own air pressure. Someone told me that somethimes the motor, due to age (this one is 13 years) will not spin fast...
Goodman AC/Furnace: condenser not coming on after installation of new blower motor
[ 6 Answers ]
Have and outside Goodman AC unit and Goodman furnace (inside duh!). Anyhoo, after installing new blower motor the AC unit will not kick on. Have reset outside breaker, and double checking wiring on controller board on furnace, noticed one blue wire was disconnected, reconnected that and still not...
Furnace won't come on unless you blow on the pilot light
[ 2 Answers ]
We have a older rheem gas furnace with a honeywell 3300 thermostat. When we turn on the furnace, the pilot comes on, but does not ignite the furnace. However, if you blow on the pilot light, it lights right up. But you have to do this every time. When the temperature in the house gets cold,...
Heil gas furnace won't blow
[ 2 Answers ]
I have a Heil heat/air gas pack(forced air) unit. It's about 20 years old, but it's been a great one. When I flip the t-stat to HEAT and AUTO I hear the unit outside firing up and I can see heat rising out of the vent, but the blower won't come on to push heat inside my house. When I turn the... View more questions Search
|