Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Shower drain pipe angle
[ 1 Answers ]
I want to install a shower in my basement. The shower will be about 4 ft from existing drain pipe. At what angle should the pipe that connects from the shower drain to the main drain pipe be to ensure water flows to drain pipe? Thanks
Projectile - what angle?
[ 15 Answers ]
Hello All, I have a question on projectiles, but I am unsure what formula I need to use to calculate the required angle. A projectile leaves the nozzle at 14 m/s, at what angle should the nozzle be so that it hits the nearest edge at the top of a wall 0.7m high with a horizontal distance oy...
Angle stop
[ 3 Answers ]
What is a standard 1/2" compression angle stop? I am installing a sink faucet supply line
Drain pipe angle issue
[ 1 Answers ]
I recently purchased a old (1900) 3-family home and during the inspection, it was noted that the drain pipe in the basement went "uphill" in one section. This issue was never resolved. At this point in time, the first floor tenant has begun to complain that when the tenants on the top floors...
Cutting cast iron pipe
[ 7 Answers ]
Hi, I have a project I am working on in the basement and I need to tie 3" plastic into 3" cast iron. I will be renting a ratchet type cast cutter. The cast comes out of the basement floor and goes straight up to serve the first floor bathroom. What I would like to do is cut a section out of the... View more questions Search
|