 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Slow running to non-existent water flow from kitchen faucet
The water flow from the kitchen faucet went from flowing really slow to nothing. We removed the lines and there was a lot of calcium deposits. We cleared all of the lines and it still didn't help, so we changed out the entire kitchen faucet and it worked great for one day. After we ran the dishwater last night, the water pressure slowed and is down to just a trickle on both the hot and cold side. BTW, the water comes out of the wall fine. Is this a dishwasher problem or what? We are baffled.
|
||||
|
||||
|
There is likely an aerator/screen on the faucet outlet. Remove it and let the water run for a minute to flush. Clean any sediment caught by the filter screen. If it continues to plug, you might consider an inline sediment filter to trap particles before they reach the faucet.
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
We bought a place that has a Kohler "Single Control Kitchen Faucet". It's a "Fairfax" model. Here's a link to the installation guide. Keep in mind we have the unit with the sidespray. http://www.us.kohler.com/onlinecatalog/pdf/1004617_2.pdf Here's the actual catalog picture: 1249 Ok,...
I changed the aerator on the kitchen faucet, but still get slow flow. The sprayer works fine and has great pressure, as do all other faucets in the house. What now?
Why does my hot water take so long to get hot. This only happens in my bathroom and takes about two minutes before the water gets hot. I have a new hot water heater all new plumbing. Prior to this, my hot water only took about thirty seconds before getting hot.
We bought a house 3 months ago Just lately we have developed a low water pressure in the kitchen and no where else in the house I have checked the screen but hasn't helped is it possible my faucet is plugged up this faucet is a two handle
View more questions Search
|
