Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Toilet , 4" pvc to 3" cast
[ 4 Answers ]
I have a home with a basement and problems with a toilet on the first floor. I had to repair the floor because the old cast flange was leaking. I cut out The flange and around 4 foot of old cast 3" pipe. I repaired the floor and used a 4" pvc flange and 4" pvc pipe with a 4"to3" rubber boot to...
Two parts: moving toilet over 4" and connecting to 4" black plastic to make shower
[ 3 Answers ]
Hi friends, I have a concrete slab foundation. In one full bath, I'm changing out the tub to put in a sauna tub, going from 60x30 to 60x32. The toilet is right next to the tub, so I want to move the toilet over at least 4" and change the sink to a pedastal sink to make room for the move for...
Connecting pvc to cast iron
[ 1 Answers ]
How can I connect a pvc pipe to a cast iron bell? What type of adhesive should be used?
Connecting PVC Line to Cast Iron pipe
[ 5 Answers ]
I am adding a second bathroom to an older 1-1/2 story house. I had planned to tie into the existing waste line. The existing toilet is on the first floor and discharges directly into a vertical cast iron pipe which appears to be 6 inches in diameter. This vertical pipe connects in the crawl space...
Shower flange"cast iron"
[ 3 Answers ]
I have a stand alone shower on a slab foundation that leaked I pulled the floor out and the cast iron flange for the liner is in bad shape and needs to be replaced. How do I go about this and where do I get the parts. View more questions Search
|