Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Remove existing shower stall drain
[ 2 Answers ]
I have an acrylic shower stall in the basement. The drain seems to be leaking and I want to remove it. I've cleaned all the sealant around the floor collar but it won't budge. Is is glued in? Does it twist off (threaded)? What tool do I need to get a grip on it? Help. -Barry
Adding a heater to an existing circuit.
[ 3 Answers ]
I want to place a 240V electric base board heater in a room. In the adjacent room I have a conveniently placed electric wall oven by itself on a 50 Amp circuit with 8 gauge wire. The oven is only rated at 30 Amps and the heater at 4.5 amps. So, I want to run wire from the oven to where the...
Replacing existing shower set
[ 3 Answers ]
Hi, I was a HomeDepot Expo today to buy new shower sets to replace the ones in our existing house (about 10 years old) and they told me something I wasn't sure was true. They said I should replace the old shower set (handles and shower head) with the same brand as the old one unless I planned to...
Adding a concrete extension to an existing patio
[ 2 Answers ]
I need to add an extension to my patio aprox 4'x4'. It needs to be 4" thick to support my AC unit. I need to know how to do it.
Adding shower to existing lav over a slab
[ 1 Answers ]
I am looking to add a stall shower to an existing half bath. Over a slab... I have never done this before and considering doing it myself... I can sweat pipe and can do basic carpentry... I know I need to jackhammer the floor remove and tap into the toilet line... are there any special concerns... View more questions Search
|