Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Compression Fitting Leaking:
[ 6 Answers ]
Hi, Tried to search, but didn't see an answer: I removed an old compression fitting from a 1/2" copper tube, and cut the tube using a tube cutter. It was a pretty old tube, so it had some crud on the outside. I sanded it down with some 100 grain sand paper and then tried to fit it with a...
Tips on copper compression fitting?
[ 11 Answers ]
My problem is whenever I work with coppoer compression fittings, I never seem to get a good seal and something always leaks. Are there any tips on how to do it right? Should I use a hack saw verse my Reciprocating Saw to cut the tube? (SLow vs Fast). I know the cut has to be straight, then...
Copper Pipe Compression Fitting
[ 7 Answers ]
I'm installing a dishwasher, I've never had one before so I am making all new pipe connections. I'm trying to add a t-fitting and then a valve to a copper water line to be able to turn off the dishwasher water supply while still being able to use the sink. I was told a T-compression would work. ...
Stand Pipe Compression Fitting
[ 5 Answers ]
Where can I buy a stand pipe compression fitting like the one in the pic? Thanks Scott
Compression Fitting Assistance
[ 1 Answers ]
Tom, Exactly how does the hose from the washing machine fit in to the compression fitting? I bought a compression fitting today but when I put the hose from the washing machine in to it, it's not tight. The supply house gave me 3 different rubber washers but none are tight. Am I doing something... View more questions Search
|