Check out some similar questions!
Need to replace 'O' rings and Gaskets in Delta Faucet
[ 1 Answers ]
My Delta faucet which is probably 30 years old constantly drips. I have replaced the shower head so know it is the faucet. It is a single handle push up for on and twist to the right or left for temperature control. How do I replace the o rings and gaskets? Thank you
Leaking single handle Delta faucet in a bath tub
[ 2 Answers ]
I have a steady-dripping single handle Delta faucet in an upstairs bathtub. It has a pretty good leak. How do I get to the leak to fix it and what do I need to replace?
Delta bath cartridge removal
[ 3 Answers ]
I have a single handle Delta bath faucet valve whose cartridge needs to be replaced because it is dripping. It is about 4 years old or so. I can find no part number anywhere on it. I got all the parts removed, down to removing the brass collar that holds the cartridge in place. NO GO! I put a...
Delta bath faucet (cold) won't turn off
[ 1 Answers ]
My delta bathroom faucet (the cold) won't turn off. Started as a small stream, now it is at full tilt. We have taken it apart and replaced the washer/seating and the cartridge. It is quite old (about 17 years)... there is a hot/cold and a hand held shower as part of the set.
How to remove a slip-on Delta bath tub spout
[ 1 Answers ]
The house is 16 years old. The bath tub spout has no identification on it, but it says "Delta Monitor" on the Temperature Control knob. The problem is that the water just flows to the tub and won't go up to the showerhead. I am trying to rePlcace the tub spout. It looks like a slip on type. I have... View more questions Search
Add your answer here.
|