Ask Experts Questions for FREE Help !
Ask
    nutthouse's Avatar
    nutthouse Posts: 12, Reputation: 2
    New Member
     
    #1

    Jan 13, 2008, 06:57 AM
    Shower won't work
    I had a guest try to use the shower in my spare bathroom. The water turns on but when you pull down the diverter nothing happens. You can here water running for a few seconds, then nothing. If I force the diverter back up the water comes out the tub spout, but the shower just won't work. The diverter is on the spout. You pull down a ring where the water comes out. I've already tried switching the entire spout with one that works properly from another bathroom. It didn't work.
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
     
    #2

    Jan 13, 2008, 07:01 AM
    the diverter is on the spout. You pull down a ring where the water comes out.
    Growler has one solution, Mass plumber has another. Let's see where the problem lies. Remove the shower head and try the shower again. If you get water out of the shower arm then Massplumber's bang on and follow growlers advice to soak the shower head or replace it. If no water comes out vof the shower are then growler's correct about the shower raiser being clogged and you need to check it out and clear it. Good luck, Tom
    massplumber2008's Avatar
    massplumber2008 Posts: 12,832, Reputation: 1212
    Senior Plumbing Expert
     
    #3

    Jan 13, 2008, 07:56 AM
    Since the diverter is on the tub spout I do not think problem is with the shower valve...
    Sounds a little odd here, but I am thinking that maybe your shower head is clogged. They have these water saver washers installed in almost all shower heads today... have for quite awhile... very fine holes... loosen shower head and look into threaded area... what do you see..? Easy to clear if this is problem... just rinse under water for a few and will be good as new. Please let me know if this was helpful by rating my answer by clicking on the RATE THE ANSWER! Button below... thank you.
    iamgrowler's Avatar
    iamgrowler Posts: 1,421, Reputation: 110
    Ultra Member
     
    #4

    Jan 13, 2008, 08:02 AM
    Quote Originally Posted by nutthouse
    I had a guest try to use the shower in my spare bathroom. The water turns on but when you pull down the diverter nothing happens. You can here water running for a few seconds, then nothing. If I force the diverter back up the water comes out the tub spout, but the shower just won't work. The diverter is on the spout. You pull down a ring where the water comes out. I've already tried switching the entire spout with one that works properly from another bathroom. It didn't work.
    It sounds like the venturi inside the valve body that goes up to the shower is plugged.

    If the bath/shower has a galvanized shower riser between the valve body and the shower head and it isn't used very often, water sitting at the bottom of the shower riser can rust the opening shut.

    When I come across this, I turn the water off to the valve, remove the cartridge/core from the valve body, remove the shower head and then hook up an air compressor to the shower arm and blast air through it, this usually clears the blockage.

    However -- Before you go to all this trouble, remove the shower head turn on the valve and try diverting water at the spout again; If you have water coming out of the shower arm, then the shower head is plugged.

    If it's plugged, discard and replace or soak in a bowl of CLR for about 24 hours.
    massplumber2008's Avatar
    massplumber2008 Posts: 12,832, Reputation: 1212
    Senior Plumbing Expert
     
    #5

    Jan 13, 2008, 05:06 PM
    Good call iamgrowler... *patting on back*! I honestly have not run into this before... very cool! Nice that even after 26 years I can still learn something!

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Shower diverter turns but doesn't work! [ 1 Answers ]

We bought a house for our daughter and in both bathrooms the shower diverter is not working. It is the type that turns from left to right but actually it now turns all the way around. On one of the two you can get it to work if you tweak it just right, but the other isn't working at all. I do not...

Shower head does not work [ 1 Answers ]

Shower head does not work actually I am getting no water to shower head I have 3 knobs hot cold and shower or tub when I turn the knob to turn on shower water shuts of to tub like it is supposed to but no water comes out of the head?? Rob

Shower was leaking from handles/I replaced and now it won't work [ 2 Answers ]

I purchased a replacement kit for a shower with leaking handles. I made sure to buy the same bonnets and seats. I changed everything out. Now it does not work at all. No water comes out of the shower head. The diverter does not leak at all but the water comes out of the shower handles only. I...

How do I get the shower to work? [ 1 Answers ]

Hi, I moved into a new place last night and the shower in the master bathroom has from top to bottom: a shower head, a single large faucet handle/knob (turn left for hot, right for cold), a large tub faucet/spout and a drain lever below. The problem is that I cannot find a lever that would operate...

Shower Diverter Won't Work [ 2 Answers ]

Hello - the faucet in my shower is the type where you pull down the spout and then the water comes out of the shower. It worked, and then five minutes later when I wanted to use it again, it didn't work! The pull down just didn't seem to catch. Is this something that I can replace on my own? Are...


View more questions Search