Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
I snapped the tip off the shower handle. Unable to screw new handle. It's a symmons
[ 3 Answers ]
I have a symmons shower faucet. While removing the old shower handle I snapped the tip off where you screw the handle on. There is no way to attach the new shower handle. Help
Shower arm flange
[ 2 Answers ]
I want to change out an old ball type end shower arm, but don't know what to do to remove the flange that's up against the shower wall. I don't see any screws holding it in place, & it's so thin that I can't get a grip on it to unscrew it. If I just remove the shower arm itself (see the post by...
New shower arm installation.
[ 4 Answers ]
I am installing a new shower arm. It screws into a cpvc fitting in the wall and I can't rotate it so it faces downward when it bottoms out inside the fitting. I added an extra layer of teflon tape but it still faces upward. How many layers of teflon tape can I add. I have used 3 layers so far. I am...
Blocked shower pipe
[ 6 Answers ]
Following recent radiator installation my Triton thermostatic shower stopped delivering cold water. I thought the Triton LP Thermostatic valve needs replacement but the new valve did not fix the problem. I noticed that no cold water is coming from the cold water pipe. It is possible that some...
Old shower arm
[ 5 Answers ]
I'm having a difficult time taking off an old ball type end shower arm. I tried twisting it off with a wrench and I'm afraid that I'm going to break the pipe off the wall. Is there a way to check that the this old ball type end shower arm is screwed in or if the shower arm attached or is there a... View more questions Search
|