Ask Experts Questions for FREE Help !
Ask
    pharmboy's Avatar
    pharmboy Posts: 4, Reputation: 1
    New Member
     
    #1

    Feb 11, 2006, 01:43 PM
    Sewer hook up
    I am presently on a septic system. Thanks to a new housing development I now have a sewer line 45 feet from the house. I got the permit and have taken care of the impact fees. I know there is a min. slope when installing sewer drain but I was wandering if you can have too much slope. With my house being on a rise I have about 6feet of drop from the house to the new sewer stand pipe. A friend of mine said if you have too much slope the water will run by the solids and cause a back up. I don't know if he knows what he is talking about cause he is not a plumber.
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
     
    #2

    Feb 11, 2006, 02:34 PM
    Quote Originally Posted by pharmboy
    I am presently on a septic system. Thanks to a new housing development I now have a sewer line 45 feet from the house. I got the permit and have taken care of the impact fees. I know there is a min. slope when installing sewer drain but I was wandering if you can have to much slope. With my house being on a rise I have about 6feet of drop from the house to the new sewer stand pipe. A friend of mine said if you have to much slope the water will run by the solids and cause a back up. I don't know if he knows what he is talking about cause he is not a plumber.
    Listen to your friend, he's right. Too little slope and the water won't carry the solids away. Too much slope and the water runs so fast it drops the solids behind. The correct slope is 1/4" to the foot. How we get around a drop like yours is to start from the house,after installing a cleanout, and run to the street using 1/4" to the foot slope. At 45 feet at 1/4" to the foot you will have dropped only 11 1/4" . This leaves a little over 5 feet drop to the city raiser. We connect using a 1/8th bend to get us down to the city raiser to make a connection. Thus the correct slope is maintained right up to the city sewers raiser. Good luck, Tom
    pharmboy's Avatar
    pharmboy Posts: 4, Reputation: 1
    New Member
     
    #3

    Feb 12, 2006, 08:38 AM
    I understand what you are saying as far as the 1/4 inch drop but if I apply this rule the pipe will be 5 feet out of the ground at the street. I have to stay under grade some how. Could I step it down using 45's and apply the rule on the straight pipe? I can't be the only person in Florida on a hill.
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
     
    #4

    Feb 12, 2006, 09:45 AM
    " I can't be the only person in Florida on a hill." Florida has hills?? Not in rhe Tampa Bay Area they don't. I'm sorry, I've never been faced with this problem. If I were in your shoes Iwould contact a local plumber with your concerns. He will be familiar with your area and can advise you much better then I. Regards, Tom
    pharmboy's Avatar
    pharmboy Posts: 4, Reputation: 1
    New Member
     
    #5

    Feb 12, 2006, 11:07 AM
    Thanks for your advice. I will get someone out to take a look at it. I want to do it right the first time and not have problems later.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Termostat hook up [ 2 Answers ]

We just recently purchase a house . I went to put a new digilal termostat.finding out to my surprise that we have some sort of air cond system. Upon furter inspection the system is a water cooled of some sort with a condenser inside of heating duct above fan blower.the wires at the thermosat are...

Wireless hook up for a laptop [ 4 Answers ]

I have cable internet with a desktop and want to hook up my new laptop with core duo in another room.

Washer Dryer Hook-up [ 5 Answers ]

I just inherited my sister's 8 year old washer and dryer (gas). The super came by and told us he would need to replace some of the hook-ups, for a total of $170. That seems a little bit expensive. Is that a normal price to replace the washer hoses, necessary clamps and valves, the gas line, etc?...

DSL-hook up problems [ 6 Answers ]

:confused: I am trying to hook up my DSL service at home and want to make sure I'm doing it right... I'm not exactly a computer expert to put it lightly OK in dummy terms, I put filters on all of my phone jacks... then on the jack I'm using for the DSL connection, I plugged the ethernet cable into...

Trying to hook thermato blower [ 1 Answers ]

Hi my name is mitch I'm trying to figure out how to hook a second thermastat up that will kick my blower on when the house temp drops I put a taylor outdoor wood furnace in with heat exchanger in my top draft double wide home I need a thermastat to kick just the blower not oil fired furnace on ...


View more questions Search