Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Replacing a shower.
[ 4 Answers ]
Hi. I'm replacing a shower that was a one-piece moulded unit. It leaked, so I bought a replacement unit to install. All is fine, except when I go to connect the drain. The trap and drain is 1 1/2" pipe and there is a nut at the top of the pipe. The drain that I have is for a 2" pipe and is...
Replacing Tub Drain
[ 2 Answers ]
I am in the process of upgrading the fixtures in my bathroom. I will need to replace the tub drain and overflow plate to match the finish on the new fixtures. The specification sheet for the new tub drain says that it has threads which are: 1 1/2"-11 1/2NPSM. Is this a standard size tub...
Replacing Tub drain into cast iron.
[ 1 Answers ]
My tub drain is downstream from both the toilet and the roof vent and every time the toilet flushes the tub trap is emptied and I get sewer smells... Photo @ www3.ns.sympatico.ca/dlpotter/Plumbing/ I think I need to add an anti-siphon device between the trap and the cast iron....
Replacing drain in a tile shower
[ 4 Answers ]
My 50 year old tile shower drain has a lead pipe leading to the waste stack. The lead pipe has corroded at the base of the drain and is leaking. I chipped away the tile around the drain and see that there is a 2.5 inch diameter hole going through the shower mortar base leading into the lead...
Replacing a bathtub drain
[ 1 Answers ]
I am trying to replace a bathtub drain ( or stopper). The old shoe strainer rusted and I can not unscrew it to remove it. What else can I do? View more questions Search
|