I am replacing my concrete-tile shower with swanstone 32x60L shower base. The new drain location will be around 4" away from the original drain location. What should I do? Can I use the existing P-trap with the new drain location by connecting them using a horizontal PVC pipe? Or do I have to...

In a fiberglass corner shower shell. What I have is an old leaking rusted Shower valve assembly. It leaks from the Shower head that is a hand sprayer with a wall mount from the sprayer. It also leaks around the both the hot and cold water wall mount knobs. The cold water knob the sleeve that...

I have a 34 year-old tiled concrete sunken roman tub that's too ratty to even think about soaking in. Besides that, the stopper's gone and the whole thing needs to be updated. It's currently being used as a step-down shower. Some dimensions: Length 57", Width 27 1/4", Depth 11"(only 6" after I...

Could anyone tell me how to replace my shower with a tub? My father said that it would be difficult, but a plumber that was out unclogging our pipes said that if the drains did not match up we could run extension pipes. My father says only if we build up the floor first. I need to know the...

I removed the old tub and exposed the drain pipe. Where the drain pipe comes through the slap there is a 8x8 hole to allow the tub drain pipes to fit. I'm going to install new drain pipes for the tile shower which consist of a 90 coming out of the main drain pipe then 6" to another 90 that will...