Check out some similar questions!

Rebeccaml · May 25, 2009, 08:55 AM

I need a new faucet in the kitchen. Old lines are copper and sweated in. Can a novice do-it-yourselfer change the copper lines to flex-steel, and put in a new faucet, or do we need a plumber? We are willing to learn.. Where can I find detailed information on how to do it? Step by step?

Milo Dolezal · May 25, 2009, 09:45 AM

Is your faucet sitting on top of the sink? Or is it mounted on the wall ?

Rebeccaml · May 25, 2009, 11:38 AM

Milo, I'm still figuring out how to use the web site--but in answer to you, my faucet is mounted on the sink on the counter-top.

hkstroud · May 25, 2009, 02:39 PM

Do you have stop valves under the sink. Can you show a picture of pipes under sink?

Milo Dolezal · May 25, 2009, 03:30 PM

I cannot imagine the original plumber soldered copper directly into the faucet. As Harold asks: would it be possible you snap a photo of it and post it ? Thank you

mygirlsdad77 · May 25, 2009, 03:42 PM

This should be a job you can do yourself, with a little patience. Pics will help us help you. Once we see what you are dealing with we will try our best to make this as simple as possible for you.

Rebeccaml · May 27, 2009, 06:56 PM

Sorry--Hubby said to put this project on hold, so I will have to address it later. But thank you for your interest to help.

massplumber2008 · May 27, 2009, 07:05 PM

We're glad to help...

When considering options in the future.. consider 3/8" COMRESSION couplings... Here, you cut the copper tubing above the shutoffs and then install compression couplings and then transition to a 3/8" compression x 1/2" female flexible riser... see pictures.

Let us know when you need more help...

MARK

Rebeccaml · May 27, 2009, 09:23 PM

You are so kind! Part of the reason Hubby says not to do it now is he's afraid we'll hit some trouble and be stuck. I'm 'more daring' and think we can do it. That's why I thought if I could get a set of basic directions on how to proceed, we could do it.

Rebeccaml · May 27, 2009, 09:28 PM

Also, I'm still figuring out how to take a picture and then post it. So you see, I still need to do some homework before I precede.But I can see that this is a great website, with many helpful folks. I will check in later when we are ready. Thank you all!

Milo Dolezal · May 28, 2009, 01:31 AM

Rebeccaml: Take small resolution photo, click on "advanced", then "browse" (find your photo), than click on "upload" and than click on "Post Quick Answer". Photo will appear under your post...

pleg99 · Jan 4, 2013, 02:44 PM

How to add pic go to tinypic.com and follow instructions:

Rebeccaml · Jan 4, 2013, 10:20 PM

Thanks for your help... but in the time since I posted this, I called someone and paid them to do it. Faucet and lines have been replaced. :-). Thanks again.

afaroo · Jan 4, 2013, 11:38 PM

Hello Pleg99,

Welcom to the AMHD website, you responded to an old almost 4 years thread, always check the date on left uper corner when you respond, and thanks to Rebbeccaml for her respond, good luck.

John