Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Replacing decorative bath faucet handles
[ 1 Answers ]
I have a jaccuzzi tub that is fairly new but the vertical teeth inside the large chrome on brass handle (which are plastic) that grab the stem have stripped. It is apparently one of the more difficult stems to match. I have not been succesfull locally. I think it would be classified at or near a...
Removing faucet handle after removing screw on top
[ 7 Answers ]
My hot water is leaking.. I remove the top screw on the handle; the handle won`t come off.. should I try and pry it off or is there another screw somewhere that I don`t know about? This is a two handle-one spout faucet.
Handles for shower broken
[ 2 Answers ]
The handles on the shower are broken. There is cold water running constantly. The center piece on the cold valve is broken off and the handle is off the hot water. There is a metal cover that is over top the handle that sits on the tile wall and had caulking around it. Do I need to remove this to...
Leaking faucet in bathtub-2 handles-30 yrs old
[ 1 Answers ]
I'm trying to get the hot water handle to come off so I can put a washer on it. I can't get that stem thing to come out and hot water is coming out at a fast clip! :confused:
Stuck handles on compression faucet
[ 4 Answers ]
I am attempting to change the seat washer on a compression faucet, however the faucets (circa 1955) appear to be stuck and can't be removed for access to the stem. Is there a plumbing tool, product or process to help remove the handle from the stem? View more questions Search
|