Question. I am in the process of remodeling a bathroom. The bathroom is on the first floor and sits on a concrete slab. The plumbing for the sink and toilet are all under the concrete. The shower that was there had a raised floor and the plumbing was installed under that floor. I would like to relocate the sink and toilet. How hard would this be to do? I am pretty handy and thought about doing it myself. Is this a job that I should be calling a plumber in to do?

Many Thanks

Chippe

I'm just like you, too cheap to hire anything done. I've built two houses by myself. What I would do is to dig around the outside to see where the sewer pipe is and what direction it goes. Is the new plan possible knowing that situation? Is it a gravity feed (or pumped). Is the sewer pipe concrete, metal or plastic? You're going to have to connect to that pipe, so make sure you can get the materials to do that. Then, assuming your plan is possible, go rent yourself a jackhammer, get yourself the proper safety protection, prepare the room for the dust and jack out the old, jack in the new (giving yourself enough room to work) and don't plan on using the fixture for a couple weeks.

theo827

By no means am I cheap I am in computers, but love to do work around my house. Just the feeling alone of what you accomplished afterwards is great!! It is a gravity feed and all the pipes are cast iron or copper. Does this matter? Is it hard to relocate the pipes once I figure what direction they are coming from? Also, should I replace with plastic or metal?

speedball1

Hey Theo,

By all means convert to PVC for your changes. Tell ya what we can do!
This is major surgery you're getting into, not a weekend project. If you're a "puter geek" I know you have a digital camera and can scan us some pictures. After you jackhammer up the floor and remove the fixtures so we can see what you have we can walk you through the remodel one step at a time. Will you be pulling a permit for this job? Back to you Theo. Tom

theo827

Do I need a permit for this job? How much do you think a job like this will cost? I have a call into a few plumbers to stop by and give me an estimate. This is also a second bathroom, so there is no rush. Do you want before pics also? Thanks

speedball1

Hi Theo,

"Do I need a permit for this job? How much do you think a job like this will cost? I have a call into a few plumbers to stop by and give me an estimate."

Call your local building department to ask about a permit but in any area that I've ever worked in any time you make a major change in your system they're gonna wanna inspect it. As for the cost remodels cost more then new construction. You can shavfe a large part of it by doing the work yourself. In order to help we would like a floor plan and a picture of the underground pipes before you start and follow up pix after that. Let us know. Tom

Chippe

I would: go to a hardware store (or maybe to a plumbing outlet store if the old pipes are "exotic") and ask the guy on the floor what you need to couple plastic (which is what I would use - schedule 40) to whatever you have going to the street. You say cast iron or copper? Is cast iron; sewer out and copper; water in? Are there two pipes? Is one your water main? Gotta be careful with the water main.

speedball1

Chippe,
Go to a hard ware store for plumbing advice? Ask a big box sales person a question about plumbing design? Why do you think those guys are out there selling instead of out there doing? I think I would take the advice of the plumbers on this page before I would that of a parts salesman. We've been out there in a ditch laying pipe and working with our own plumbing designs while they hang in the stoire. Unless the salesman is a retired plumber I would certainly take a working and licensed plumbers word over that of a sales person any day of the week. We can tell you how to convert to PVC. I don't know exactly what "exotic pipes" are but when I find out we can probably help with that too. In short I think Chippe's mistaken in his advice and we stand on our record. Regards, Tom

theo827

Well, I am undecided on whether or not to tackle this job. I have done plumbing before, just never dealt with concrete. However, if I do decide to go forward there will be plenty of pics being posted
Thanks