Ask Experts Questions for FREE Help !
Ask
    big_cat's Avatar
    big_cat Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Dec 11, 2006, 07:28 AM
    Price Pfister New Installation
    New construction - shower stall only, no tub. Price Pfister single handle control for shower. Not enough hot water as shower is cool, not warm or hot. Plumber was fired for other stupid stunts but now I need to warm up shower water temperature. Does Price Pfister have valve that is adjustable in the shower control? If so, where is it and can I get to ti without tearing apart everything just ot set the temperature for the shower? Thanks in advance for your help.

    :D :D :D
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
    		  
    #2

    Dec 11, 2006, 10:51 AM
    I need the model number of your faucet. Have you opened up the faucet and checked the hot water inlet ports on the cartridge? To check to see if the valve's piped correctly when the valve's open turn the hot water on to flush the supply and to see if the water gets hot. Good lucki, Tom
    big_cat's Avatar
    big_cat Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Dec 11, 2006, 11:40 AM
    It is mounted in the wall of a cultured marble shower stall. I do not have the box any longer so I can't get the model number off the box. It was an "Ashfield Satin Nickel" and it was made for the shower/tub combination. The tub part was plugged off and it only operates the shower part now. The faucet was purchasede within the past six months and it was not old stock at the time of purchase. If this does not tell you what you need, please tell me where the model number would be located on the faucet and I will get it for you.

    Thanks in advance!

    :D
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Concrete price [ 5 Answers ]

I looking to have 8 yards of concrete done with a stamp finish for my walk way. About how much will that cost me?

Price Pfister 26 Series Faucet [ 4 Answers ]

I recently intalled a Price Pfister 26 series kitchen faucet. The faucet seems to work correctly, except that the flow out the faucet is low. Also, the flow from the spray nozzle is greater than from the faucet. I have checked the system pressure to be 40 to 50 psi, so I know that is not the...

Tub/ shower leaking. Price Pfister valve question. [ 4 Answers ]

Hi! We have an old Price Pfister Tub and shower faucet. It has been dripping for some time now and I would like to replace the whole thing with something newer anyway. If at all possible I would like to do it myself. I have been doing some research and have found that the new OX8 valves have a...

Price pfister [ 2 Answers ]

Recently installed 1 knob shower faucet made by price pister . Problem here is the tub spout has plenty of flow but when you pull the knob for the shower the pressure isn't that strong . Any ideas on how to get more pressure from shower. Thanks for any info, Ryan p.s. I used 1/2 copper

Bd and ask price [ 1 Answers ]

Why we would see sometimes that the bid is lower than the asked price and vice versa?

View more questions Search