Ask Experts Questions for FREE Help !
Ask

plumbing questions answered free

Asked Apr 7, 2012, 08:19 AM — 2 Answers
I have to replace my dishwasher. I have a valve assembly as shown in :
http://tinypic.com/view.php?pic=4htu9&s=5
It has lines and tow valves one to the faucet and one to the dishwasher. Neither shuts off anything. What is this????

2 Answers
joedsim's Avatar
joedsim Posts: 2, Reputation: 1
New Member
 
#2

Apr 7, 2012, 08:25 AM
Spelling correction last line:

I have to replace my dishwasher. I have a valve assembly as shown in :
Image - TinyPic - Free Image Hosting, Photo Sharing & Video Hosting

It has two lines and two valves one to the faucet and one to the dishwasher. Neither shuts off anything. What is this????
Helpful
massplumber2008's Avatar
massplumber2008 Posts: 10,566, Reputation: 5097
Plumbing Expert
 
#3

Apr 7, 2012, 09:30 AM


Hi Joe

Obviously, if the shut off doesn't shut the water down the shut off needs to be replaced (or at least replace the inner washers to the shutoffs).

The other "valve" is a water hammer arrestor...sometimes installed where quick reacting valves such as the dishwasher solonoid valve in your case can close quickly and cause water hammer noises.

For now, I'd shut off the cold water supply into your water heater, which will shut off the hot water, and then replace the washers to the shutoff upstairs...or just install the dishwasher...up to you, of course!!

Questions? Let me know, OK?

Mark
Helpful

Not your question? Ask your question View similar questions

 
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Add your answer here.

Remove Text Formatting

Undo
Redo
 
Decrease Size
Increase Size
Bold
Italic
Underline
Align Left
Align Center
Align Right
Ordered List
Unordered List
Decrease Indent
Increase Indent
Insert Email Link
Wrap [QUOTE] tags around selected text
Wrap [CODE] tags around selected text
Wrap [HTML] tags around selected text
Wrap [PHP] tags around selected text
Wrap [YOUTUBE] tags around selected text
Notification Type:



Check out some similar questions!

Plumbing questions answered free? [ 12 Answers ]

I have a Kohler kitche faucet that is 12 years old. The issue is the hand hels sprayer nozzle you you pull out from the counter top. When we go to use it it just piddles out a little bit of water. I have taken the hand held part of and cleaned it with CLR. That didn't help. Will I need to replace...

Free plumbing questions answered? [ 0 Answers ]

I am replacing an existing gas logs with a new set. The existing had a copper pipe from the wall of the ceramic box And a shutoff valve it ran under the existing logs about 1 foot To the other side of box to the controls. The new logs I bought a flexible stainless steel pipe that says It ok...

Plumbing questions answered? [ 1 Answers ]

I have a solid fuel stove which heats the rads. When we put on the fire water comes out of the overflow pipe from the attic. There is also a lot of steam coming from the tank in attic and the pipes shake. Any suggestions to what the problem might be? The rads do not heat properly either

Plumbing questions answered [ 5 Answers ]

Under my kitchen sink there are two PVC pipes coming out of the wall. They are 8 1/2" apart and appear to be similar, except one is capped. One is in use for the sink drain, and I'm hoping the other is a drain, too. The house is 22 years old; Seattle area. What are my chances that the second is...

Plumbing questions answered [ 1 Answers ]

We removed the toilet in our master bathroom to do some tiling. Once done, we were not able to install the toilet back because a piece of the flange had broken off. We decided to buy a new toilet (that uses less water) and called a plumber to put a new flange down and install the new toilet. It...


View more Plumbing questions Search