I have a well house and a pump that is approximately 75 feet down. I had water today when I left today and upon my return 5 hours later there was no water in the house. I changed this pump approx 3 or 4 years ago... where do I begin to test? Could it be frozen?

We have fuses in our house. One of our fuses blew last night, so we took the good fuse from somewhere else and put it in where the fuse had blown. We need know what that fuse was for. This morning I realized I had no washer. I bought a new fuse and put it in. I had water also. Two or three...

This morning while conducting laundry the water stopped running. I had went down stairs and had replaced the pressure switch but this is still not the problem... the pressure switch when in the closed position sparks but the pump does not turn on... whats wrong?

We had cold weather and we lost our water. It still hasn't come back. We replaced a blown fuse but it still doesn't work. Does the pump come on even if it needs to be primed? It makes no sounds. Does this mean that the motor is burned out? Or do I just need to prime it? Thank you.