Ask Experts Questions for FREE Help !
Ask
    hood2u's Avatar
    hood2u Posts: 2, Reputation: 1
    New Member
     
    #1

    Jul 4, 2012, 11:23 AM
    No hot or cold water from bath sink faucets.
    No hot or cold water from bath sink faucets after installing shut off vales on the water lines under the sink.
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
     
    #2

    Jul 4, 2012, 11:25 AM
    Did you turn main back on as well as new valves?
    hood2u's Avatar
    hood2u Posts: 2, Reputation: 1
    New Member
     
    #3

    Jul 4, 2012, 11:37 AM
    Quote Originally Posted by Stratmando View Post
    Did you turn main back on as well as new valves?
    Yes
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
     
    #4

    Jul 4, 2012, 02:16 PM
    Try turning on the hot and cold faucets to maybe half way, then turn ALL valves to the center position, see if that helps locate the problem.

Not your question? Ask your question View similar questions

 

Add your answer here.


Check out some similar questions!

Hot tap in bath does not work and fitment blew off cold water pipe under bath. [ 16 Answers ]

How often do water pipes under bath need to be thoroughly serviced? First, hot tap bath had no water; this was fixed and then days later fitment blew off the cold water pipe, again under the bath. What could be the connection between these two incidents?

I only get hot bath water when cold tap in sink is turned on why? [ 0 Answers ]

I had a problem with boiler not operating during hot water demand. Central heating is fine. I switched off boiler for a minute and switched it on again and got continued hot water from Kitchen and bathroom sink and for a while in the bath. But after a while water in bath turned cold. Now I can...

Warm water from cold sink faucets after taking a shower [ 1 Answers ]

We recently had our main bathroom remodeled completely from 1970's blue to tile and granite update. The entire plumbing was redirected from the basement due to old plumbing on the outside walls and freezing. We use Dantz fixtures with a temperature control and diverters in the tub and shower. ...

Shower won't work unless Hot/Cold faucets in sink are on [ 3 Answers ]

My upstairs bathroom water isn't working right. The toilet tank won't fill and the shower will not work, the cold water also doesn't work. If the hot / cold is turned on in the sink the toilet tank fills and you can get hot water only out of the shower. How do I resolve a problem such as this?


View more questions Search