Add your answer here.
Check out some similar questions!
No water in hot or cold bathroom sink after flushing my gas hot water heater [ 5 Answers ]
Thank you. I flushed my hot water heater last night. I only turned the cold water intake to the heater off and on BUT now, after the flush, my second floor bathroom sink faucets (both hot and cold) don't work at all. The shower and the tub in the bathroom work but NOT the sink- HELP! Thanks so...
Running hot and cold water to outside sink [ 6 Answers ]
I want to run hot and cold water to an outside sink from the hot and cold to the washing machine in the garage. It is a straight shot to the outside wall about 5'. Should I open the wall and solder copper lines or are there faucets that accept washer hoses that I can run using why fittings. I...
Sudden loss of hot & cold water pressure in one faucet [ 1 Answers ]
Recently the pressure in both the hot and cold faucets on one bathroom sink dropped to almost nothing. We replaced the very old faucet with a new one but it did no good. We still have just the tiniest trickle out of both hot and cold. The tub and toilet in the same room are not affected. The...
No cold water on 2nd floor [ 1 Answers ]
The weather has been very cold. This morning I found that I have water pressure in the basement and 1st floor of the house but no cold water on the 2nd floor -- only hot water. Please advise. Thanks.
RE: Little Cold Water and plugged sink [ 1 Answers ]
Very little cold water is coming into the shower and tub faucet although it is doing fine to the toilet and sink. Someone told me the faucets may need to be taken apart and cleaned but I don't know how. The faucets are barely a year old. We are on well water. The bathroom sink is real sluggish...
View more Plumbing questions Search