Ask Experts Questions for FREE Help!
Ask    ||    Answer
 
Advanced  
 

Ask QuestionsprogressAnswer QuestionsprogressBuild ReputationprogressBecome an Expert
 
Free Answers in 3 Easy Steps

Register Now
3 Steps

At Ask Me Help Desk you can ask questions in any topic and have them answered for free by our experts. To ask questions or participate in answering them you must register for a free account. By registering you will be able to:
  • Get free answers from experts in any of our 300+ topics.
  • Accept money for answers that you provide.
  • Communicate privately with other members (PM).
  • See fewer ads.

Home > Home & Garden > Plumbing   »   new kitchen sink too small for old p-trap

 
Thread Tools Search this Thread Display Modes
Question
 
 
#1  
Old Jul 30, 2006, 07:59 PM
shawna915
New Member
shawna915 is offline
 
Join Date: Jan 2006
Posts: 11
shawna915 See this member's comment history on his/her Profile page.
new kitchen sink too small for old p-trap

Hi! You all had such good advice last winter when I was having drain problems that I thought of you all first about this. I am remodeling my small galley kitchen and trying to maximize space. Since my sink drain goes into the wall, I decided to try to get a drawer under the sink base. I checked with the manufacturer to make sure it would fit, but his info was a bit off. So now I have a pipe into the wall about 2 1/2 inches above the floor of the new sink cabinet. What can I do about a p-trap? Are there other configurations? Do I have to cut a hole in the floor of that new cabinet? Again, any ideas gratefully appreciated!

~Shawna

Reply With Quote
 
     

Answers
 
 
Old Jul 30, 2006, 08:43 PM   #2  
Heating and Air Conditioning Expert
letmetellu is offline
 
Join Date: Dec 2005
Location: Texas
Posts: 2,845
letmetellu See this member's comment history on his/her Profile page.letmetellu See this member's comment history on his/her Profile page.letmetellu See this member's comment history on his/her Profile page.
What would keep you from going into the wall and raising the pipe that is now coming out of the wall?
A solution that might work is to put an ell on the pipe coming out of the wall and then put a nipple into the ell to make it the height that it needs to be, then add another ell to make it point toward the center of the lavatory.This is not the best way to do it but it would work if no other solution was available.

Comments on this post
speedball1 disagrees: This would build a "S" trap. "S" traps are outlawed.
  Reply With Quote
 
     
 
 
Old Jul 31, 2006, 06:58 AM   #3  
Senior Plumbing Expert
speedball1 is offline
 
speedball1's Avatar
 
Join Date: Jan 2003
Location: Sarasota, Fl.
Posts: 18,983
speedball1 See this member's comment history on his/her Profile page.speedball1 See this member's comment history on his/her Profile page.speedball1 See this member's comment history on his/her Profile page.speedball1 See this member's comment history on his/her Profile page.speedball1 See this member's comment history on his/her Profile page.speedball1 See this member's comment history on his/her Profile page.speedball1 See this member's comment history on his/her Profile page.speedball1 See this member's comment history on his/her Profile page.speedball1 See this member's comment history on his/her Profile page.speedball1 See this member's comment history on his/her Profile page.
Pay to call speedball1 for advice ($.95/min)
Call speedball1 via Skype™
Quote:
Originally Posted by shawna915
Hi! You all had such good advice last winter when I was having drain problems that I thought of you all first about this. I am remodeling my small galley kitchen and trying to maximize space. Since my sink drain goes into the wall, I decided to try to get a drawer under the sink base. I checked with the manufacturer to make sure it would fit, but his info was a bit off. So now I have a pipe into the wall about 2 1/2 inches above the floor of the new sink cabinet. What can I do about a p-trap? Are there other configurations? Do I have to cut a hole in the floor of that new cabinet? Again, any ideas gratefully appreciated!

~Shawna
You have three options here. (1) Cut the cabinet floor to accommodate the bend of the trap or (2) open up the wall and raise the stubout as letmetellu suggests. Or (3) While I don't recomend it and I'm sure you'll have drainage problems on down the line you could build and install a "S" trap as letmetellu
has laid out in his post. It wouldn't be fair not to give you ALL the options. even the bad ones. good luck, Tom
  Reply With Quote
 
     
 
 
Old Jul 31, 2006, 04:10 PM   #4  
New Member
shawna915 is offline
 
Join Date: Jan 2006
Posts: 11
shawna915 See this member's comment history on his/her Profile page.
Thanks, guys! I had thought that maybe going into the wall might work, but wasn't sure. As this is over my level of confidence, I called a plumber and hope he agrees. I really don't want to cut into that cabinet's floor if there is another solution. And, while I'm glad to have all the options, I would never have gone along with an 'S' trap as a solution.

Now, about the drain in the wall. My condo is one floor on a slab, and the main drain is in the utility room and is about six feet away in a line along the wall. Is the pipe going to be going up or down in the wall?
  Reply With Quote
 
     

Your Answer
Email me when someone replies to my answer
Join Login





Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

 
Similar Sponsors


Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page

Similar Threads
bathroom sink drain trap
(1 replies)
Kitchen Sink/Laundry Sink Drain Vent Non-exist
(3 replies)
Kitchen sink vent
(4 replies)
Kitchen Sink faucet - odd nut
(2 replies)
kitchen sink
(1 replies)

Search this Thread

Advanced Search

Bookmarks

Sponsors



Copyright ©2003 - 2009, Ask Me Help Desk.
All times are GMT -8. The time now is 11:20 PM.