Ask Experts Questions for FREE Help!
Answer   ||    Advanced Search

Ask your question or search...
International Sites: Nederlandse experts vragen
User Name 
Password 
Join   Forgot password? 

Home > Home & Garden > Plumbing   »   LOW water level in toilet bowl

Question
 
 
#1  
Old Mar 15, 2008, 02:43 PM
internetdiagnosis
New Member
internetdiagnosis is offline
 
Join Date: Mar 2008
Posts: 10
internetdiagnosis See this member's comment history on his/her Profile page.
LOW water level in toilet bowl

Okay, a couple of months ago, a friend of mine replaced the seal on my toilet because water was coming out from underneath. Since then, the water level in the bowl has been really low. Now I have seen toilets like this before and it is functional, but it just annoys me. I have a 3 year old and her little buns don't cover the whole toilet, so her droppings hit the porcelain rather than the water!

I looked a bit on the internet and keep finding where the refill tube should be located over the overflow tube. What I am finding in my tank is that the fill tube is located to the rear of the overflow tube and doesn't seem to move...

So, my question is, what can I do (lamen terms please) to raise the water level back up?

One other thing, since then, when it fills, it is awfully loud!

Thanks,
Jennifer

Reply With Quote
 
     

Answers
 
 
Old Mar 15, 2008, 02:52 PM   #2  
New Member
internetdiagnosis is offline
 
Join Date: Mar 2008
Posts: 10
internetdiagnosis See this member's comment history on his/her Profile page.
Okay, now that I have decided to look at other posts, I did find an answer to my problem. Being that is the case, I will pose a new question.....

How do I safely move the refill tube so that it hangs over the overflow tube without breaking it? Should this easily move?
  Reply With Quote
 
     
 
 
Old Mar 15, 2008, 03:17 PM   #3  
Senior Plumbing Expert
speedball1 is offline
 
speedball1's Avatar
 
Join Date: Jan 2003
Location: Sarasota, Fl.
Posts: 19,004
speedball1 See this member's comment history on his/her Profile page.speedball1 See this member's comment history on his/her Profile page.speedball1 See this member's comment history on his/her Profile page.speedball1 See this member's comment history on his/her Profile page.speedball1 See this member's comment history on his/her Profile page.speedball1 See this member's comment history on his/her Profile page.speedball1 See this member's comment history on his/her Profile page.speedball1 See this member's comment history on his/her Profile page.speedball1 See this member's comment history on his/her Profile page.speedball1 See this member's comment history on his/her Profile page.
Pay to call speedball1 for advice ($.95/min)
Call speedball1 via Skype™
Quote:
Originally Posted by internetdiagnosis
Okay, now that I have decided to look at other posts, I did find an answer to my problem. Being that is the case, I will pose a new question.....

How do I safely move the refill tube so that it hangs over the overflow tube without breaking it? Should this easily move?
The bowl fill tube (see #5 in image) is a flexable plastic tube that runs from the top of the ball cock over to the white overflow tube. It just wants to slip into the overflow tube a half inch or so. There should be a retaining fitting on the overflow tube so the smaller tube doesn't slip out. If there isn't one you will have to make one out of a paper clip. If the little tube is so old that it's not flexible any more you can pick up a new one at a plumbing store for pennys. Let me know how it works out. Tom
  Reply With Quote
 
     
 
 
Old Mar 15, 2008, 03:20 PM   #4  
Plumbing Expert
massplumber2008 is offline
 
massplumber2008's Avatar
 
Join Date: Jan 2008
Location: Boston, Massachusetts
Posts: 5,478
massplumber2008 See this member's comment history on his/her Profile page.massplumber2008 See this member's comment history on his/her Profile page.massplumber2008 See this member's comment history on his/her Profile page.massplumber2008 See this member's comment history on his/her Profile page.massplumber2008 See this member's comment history on his/her Profile page.
Hmmm...you better be careful there. How old is your toilet? And, if the tube is so hard to move....and toilet worked fine before when tube was over overflow tube ....how did tube get moved?

I need to know how old, and the name on the toilet (american standard by chance..?) if possible...get back to me...Mark


.
  Reply With Quote
 
     
 
 
Old Mar 15, 2008, 03:29 PM   #5  
New Member
internetdiagnosis is offline
 
Join Date: Mar 2008
Posts: 10
internetdiagnosis See this member's comment history on his/her Profile page.
As ashamed as I am of these pictures, I will post them anyway
Attached Images
  
  Reply With Quote
 
     
 
 
Old Mar 15, 2008, 03:31 PM   #6  
New Member
internetdiagnosis is offline
 
Join Date: Mar 2008
Posts: 10
internetdiagnosis See this member's comment history on his/her Profile page.
And two more. Sorry about the poor quality, I quickly took it with my phone...
Attached Images
  
  Reply With Quote
 
     
 
 
Old Mar 15, 2008, 03:33 PM   #7  
New Member
internetdiagnosis is offline
 
Join Date: Mar 2008
Posts: 10
internetdiagnosis See this member's comment history on his/her Profile page.
Brand is a Gerber. I would imagine the toilet is about 8 years old. Also, I don't know how it got where it is now?! I can't say for certainty that it was ever actually over the overflow tube.

Why is it so disgusting on the inside of the tank? Is it okay to clean all that black gunk? If so, what type of cleaner is safe to use in there?
  Reply With Quote
 
     
 
 
Old Mar 15, 2008, 03:41 PM   #8  
New Member
internetdiagnosis is offline
 
Join Date: Mar 2008
Posts: 10
internetdiagnosis See this member's comment history on his/her Profile page.
One other thing, I could have swore I remembered at some point in time, there being a little flexible tube that actually fit on the 'refill tube'. It was a hospital yellow/beige color and resembled the size of a straw, but very pliable, like a thick latex. The friend who fixed my leak and replaced the seal swore there was no such thing! See I looked later on because it was so noisy when filling up. Should there indeed be additional tubing coming off that refill tube?
  Reply With Quote
 
     
 
 
Old Mar 15, 2008, 03:52 PM   #9  
New Member
internetdiagnosis is offline
 
Join Date: Mar 2008
Posts: 10
internetdiagnosis See this member's comment history on his/her Profile page.
The more I analyze this, the more I am realizing there had to be another piece there! Look at the tip of this "refill tube" and how white it is compared to everything else! Indicative of there being something snug over it for quite a duration, wouldn't you say?
Attached Images
 
  Reply With Quote
 
     
 
 
Old Mar 15, 2008, 04:00 PM   #10  
Plumbing Expert
massplumber2008 is offline
 
massplumber2008's Avatar
 
Join Date: Jan 2008
Location: Boston, Massachusetts
Posts: 5,478
massplumber2008 See this member's comment history on his/her Profile page.massplumber2008 See this member's comment history on his/her Profile page.massplumber2008 See this member's comment history on his/her Profile page.massplumber2008 See this member's comment history on his/her Profile page.massplumber2008 See this member's comment history on his/her Profile page.
NOPE..great pics ID

Wait here..I have the answer...BRB
  Reply With Quote
 
     

Your Answer
Email me when someone replies to my answer
Join Login



Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes
Ask your question or search...



Similar Threads
low toilet bowl level
(2 replies)
low water level in toilet bowl
(2 replies)
Water level in toilet bowl is low
(1 replies)
Low water level in the Toilet Bowl
(1 replies)

Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Search this Thread

Advanced Search

Bookmarks





Copyright ©2003 - 2009, Ask Me Help Desk.
All times are GMT -8. The time now is 11:59 AM.