Apologies in advance for asking another variation of the same question on this forum....
Installing a HE washer and want to position the washer in opposite corner of current washer. Current drain is, say 36 inches and 2 inch. it goes into the wall nicely, through the floor and tees within say 5 feet of opening.
This is a thirty year old house and never a drain problem here.
We are moving the HE washer 10 feet lateral (if we can) to allow my daughter to sleep. It's a difficult chore to install the desired 2 inch line next washer in planned location. I think my options are:
- long reinforced DW drain house along the wall (which is not too stylistic)
- Install a 1.5 inch drain in the wall, then once in crawl, open diameter to 2 inch, turn 90 degrees, travel 8 feet and tee into 2 inch drain under the floor. This is a bit of work, no sense doing it if it isn't going to work. What are your thoughts?
Longer term, we may use the old 2 inch stack for a laundry tub.
Ergonomics suggest a counter adjacent to washer / dryer stack, thus the tub is still a far reach (but a big catch basin)....
Linear Mode
