Add your answer here.
Check out some similar questions!
Copper and plastic pipe for shower fittings [ 2 Answers ]
I need to install a new shower valve but have no experience sweating copper pipe. Is it possible to use one of the new plastic pipe materials/methods to connect? I would have to use plastic on both the inlet and outlet sides of the valve. Thanks in advance for any advice, thoughts, ideas.
Bursting of GI pipes [ 2 Answers ]
Please tell me that is there any formula, by virtue of which I can calculate the minimum pressure required to burst a GI pipe (for home use)? Else please tell me the minimum pressure required to burst a GI pipe of 1" dia used at home.
Leaking shower pipes [ 3 Answers ]
I have a very unusual problem. On the left and right side of my shower cubical on the outisde walls where they are bricked in the bricks just in the mid centre of the wall (only) are getting a damp and bobbling patch. I have no idea what could cause these isolated 'damp' patches on the brickwork....
New shower pan with plastic drain is leaking [ 4 Answers ]
Hello, I have installed a new shower pan in the basement and the pan came with a plastic drain kit. The drain is leaking around the seal underneath very slightly. Is there some type of caulk or epoxy that I could apply to the bottom to stop the tiny leak? Though I followed the manufactures...
Removed pipes to recover earring, now another pipe is leaking! [ 1 Answers ]
After losing an earring down our bathroom sink, I took off the "U" shaped pipe and was able to recover my earring. I also found a few other small metal objects in there. The sink had been running very slowly in the past month anyway despite multiple Draino treatments. I thought things would be...
View more Plumbing questions Search