Ask Experts Questions for FREE Help !
Ask
    trogers1981's Avatar
    trogers1981 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Feb 3, 2012, 09:06 AM
    How to install a studor mini vent?
    Do I need to apply an adhesive to the 1.5" pipe that the studor mini vent will be going on? It fits well when placed on the pipe but is there a need to have an adhesive?
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
    		  
    #2

    Feb 3, 2012, 09:11 AM
    Yes! You should prime and cement the AAV to the raiser. This is done so that no sewer gas can escape. FYI,
    The reason it fits snug is because the female fitting has a slight taper and they bind. Regards, Tom
    afaroo's Avatar
    afaroo Posts: 4,006, Reputation: 251
    Ultra Member
    		  
    #3

    Feb 3, 2012, 09:14 AM
    I would suggest yes, the AAV comes with threaded end, see the images below, Thanks.

    John
    Attached Images
      
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Studor Mini-Vent [ 5 Answers ]

I recently had my kitchen remodeled and the plumber installed a Studor Mini-Vent under the sink. Due to space limitations, he installed it sideways and didn't glue the PVC pipes together so it's easily removed. Is this a proper installation? I am pretty sure this (either the vent or the break in...

My studor mini valve won't vent. [ 5 Answers ]

I have a studor mini vent under my sink that will not let the water drain out - water drains when I remove the vent. I tried to replace it but got the same results. Is there a something you have to do to 'activate' a studor valve? I snaked the line underneath and it is clear. Any suggestions?

Studor vent (air admittance vent) [ 3 Answers ]

I want to install a utility sink in my garage, which will require approx a 30 ft run of 11/2 " drain pipe. The 11/2" will be going into the 3" main drain line. I should be able to get 1/4" per foot pitch over the 30 ft run. My guestion is ,will I need to install a studor vent at the sink trap?

Studor vent vs. Vent pipe [ 8 Answers ]

Applications for each? Differences? Pros/Cons?

Using "Studor" mini vent in bathroom wall [ 1 Answers ]

I am completely renovating a bathroom in a 1973 mobile home. There is no vent stack from any of the toilet, tub or lav fixtures. I plan to install the "Studor" vent in the wall. Can I use one vent for two fixtures or does each fixture need it's own vent?

View more questions Search