Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
To install Unitrol Gas valve in a water heater
[ 8 Answers ]
Hi guys , To install a unitrol shall I leave the wrapped plastice on probe or just take it out and toss it ? What kind of wrench shall I use , a grip vise is possible Thanks for a quick answer
Gas water heater pressure release valve leaking water
[ 14 Answers ]
Hello all, I have a slight issue with my gas water heater. It's a AO Smith 32.75 gallon type. All of a sudden, water is coming out of the relief valve pipe. I have placed a coffee can there, and I have to empty it out every few hours now. Im not sure where to turn for this one, as I have...
Gas water heater pressure release valve leaking water
[ 1 Answers ]
I have a gas water heater (50 gallon) in the garage. There are three openings on top of the tank (roof or the top surface of the tank). One is for cold water pipe, one for hot water pipe and the third one is a valve with flip style. Today I noticed water on the floor of the garage. Hot water...
Flexi vs. Black iron gas line to water heater gas valve
[ 3 Answers ]
I have seen gas water heater " install kits" that use the yellow flex appliance line for the gas connection to the gas valve on the water heater. My tank was installed when the house was built and has black iron pipe all the way to the union and into the valve on the tank. I have heard some codes...
Water heater- gas line to pressure valve?
[ 4 Answers ]
I'm inspecting a house and found a water heater installation I've never seen before. The pressure relief valve is on top of the water heater, and it has an IN and OUT. The gas line is connected to the IN, and the OUT goes to the water heater manifold.:eek: Can this be right? Normally I see a... View more questions Search
|