Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Removing handle from a Moen single-handle shower
[ 5 Answers ]
The shower is dripping and I am trying to get to the stem by removing the handle. I can see a set screw recessed into the bottom of the handle. I have tried an allen wrench but bent it without any success.
Faucet Handle
[ 21 Answers ]
I have a house that was buildt in 1980 and all the plumbing water supply is copper. In my Guest bathroom the handles for both Hot & Cold water haven't been working lately, they are slowly stripping the copper handle extensions, see photo attachments. I bought several boxes of those universal...
Re-install Moen single handle shower handle
[ 12 Answers ]
My Moen shower handle came off. I see there is a set screw at the bottom of it. The handle attaches to a plastic piece; however, you have to pull out the plastic piece from the wall to get the handle to fit over the plastic and to give the set screw something to set into. How do I pull out...
Replacing single handle bathtub handle with 2 handles
[ 1 Answers ]
Hi, I am redoing the tile in my bathroom and want to change my single handle hot/cold fixture with a 2 handle fixture... Can I do this myself or do I need a plumber?. My house was built in the 1960's and the faucet seem original.. I do have access from the back and will have access in front once...
Low hot water pressure from kichen faucet only- 1 handle faucet
[ 7 Answers ]
Hi. My question is similar to one asked a few posts ago except this is a 1 handle faucet. I plan on maintaining the boiler from now on but I have to fix the flow problem first. I disconnected the hot water supply line to the faucet and the pressure is excellent so I assume the problem is in the... View more questions Search
|