My carpenter made a mistake and cut the hole for the shower arm too large. I've been trying to find an oversize (3") shower arm flange to cover it but can't find one. Are there any suggestions as to how I can cover up this mistake.

I am not very good at this happy homeower stuff and I am trying. This question may seem trivial and I am not sure what to do next. I am trying to replace a shower head that is probably the original one in my 55 year old home. I figured out that I will have to replace the shower arm (the...

I have a 19 year old home with antique brass finish fixtures that I'd like to update to chrome. I have tried to change out the ancient, yellowed plastic handheld shower (broken handle and hose not long enough) however the shower arm has a ball at the end which will not release to allow me to...

I have a shower downstairs where a 6" shower arm comes out of a wall that was connected to a 90 degree threaded joint inside the wall. My roommate without my permission took out the 6" arm and installed an 'S' arm. She did a poor job (did not take out the old thread/puddy, didn't put in new pipe...

We had a leak, so we had the water line and sewage line from the house to the street replaced. Now we have no water in the shower. Some debris most have clogged up the line coming into the shower. All the other lines are fine. My Dad is somewhat of a handyman and wants to fix the problem...