I am converting a bath tub into a shower and I have to move the drain away from the wall. After cutting the cast iron pipe, I need to connect it to a PVC trap and extend it vertically for the next step. How do I do the connection? Thanks, Jalal

Is there a glue on the market that joins metal to pvc I need to connect a 50mm pvc pipe to a 60mm metal pipe I have a connector (pvc) that will connect perfectly its got thread but the 60mm metal pipe is plain on the inside I have tried silicone but it can not handle the pressure. I am connecting a...

Joining a PVC pipe with a chrome plated steel one. Is this possible? If so, how, please? I'm referring to joining two pipes together, that fit right into each other, so that they're sealed in some way without using some sort of threads. If using threads of some sort is the recommendation,...

I need to cut a kitchen sink PVC waste pipe to replace the base unit enclosing it and then, subsequently, remake the join. The problem is, I have about 1/4" to play with! Are there any clever adapters that I can use that either fit inside the inner sleeve, or outside the outer sleeve that I can use...

I have a 1 11/2 in diameter copper drain pipe and need to connect it to a PVC pipe. What's the best way to do this? Thanks