Ask Experts Questions for FREE Help !
Ask

Hose Bib Question

Asked Jan 2, 2012, 12:05 PM — 2 Answers
I have a leaky hose bib which is probably 20 years old. There is a packing nut 3/4" just below the handle; and another larger nut 1 1/8" on the body of the assembly. In fact it appears to be a part of the body so I have not tried to loosen it. I loosened the packing nut and unscrewed it completely and slid it up the valve stem. However, even though it wiggles side to side, I cannot pull the valve stem assembly out of the body. It has no vertical movement. Does the larger 1 1/8 nut have to be taken off to get to the seals on the valve stem?

I can't afford a plumber; and I don't know how to solder so I can't just replace the leaky unit.

Please advise.

Regards,

Bob

Search this Thread
Share |
2 Answers
ballengerb1's Avatar
ballengerb1 Posts: 25,642, Reputation: 11296
Home Repair & Remodeling Expert
  
#2

Jan 2, 2012, 12:19 PM


You can't just pull the stem out but keep trying to twist the knob counterclockwise, it should unscrew.
Helpful  (1)
speedball1's Avatar
speedball1 Posts: 27,662, Reputation: 9541
Senior Plumbing Expert
  
#3

Jan 2, 2012, 12:24 PM


Put some WD-40 on the threads and turn the big not out counterclockwise and the entire stem and washer assemble will come out. Good luck, Tom
Helpful  (1)
Not your question? Ask your question View similar questions
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Add your answer here.

Remove Text Formatting
 

Undo
Redo
  
Decrease Size
Increase Size
Bold
Italic
Underline
Align Left
Align Center
Align Right
Ordered List
Unordered List
Decrease Indent
Increase Indent
Insert Email Link
Wrap [QUOTE] tags around selected text
Wrap [CODE] tags around selected text
Wrap [HTML] tags around selected text
Wrap [PHP] tags around selected text
Wrap [YOUTUBE] tags around selected text
Notification Type:



Check out some similar questions!

Hose bib [ 25 Answers ]

I'm located in the Phoenix AZ area. I have a hose bib that's continually leaking. It's time to get it replaced, I think I can do it but the whole pipe and bib is painted over. Can I just use a plumber's torch to burn off the paint from the bib and pipe? I believe it's the soldered kind too but...

Hose Bib Replacement [ 1 Answers ]

I live in central Florida and my house is only 3 years old, however my hose bib continually leaks no matter how hard I turn the valve off. I'm pretty handy at repairing things, but my question is how do I know if the hose bib is threaded or glued on? I know all the plumbing was done in pvc because...

Replacing hose bib [ 5 Answers ]

Hello Ask Me, I am in the process of replacing a hose bib on the outside of my house. The problem is, it won't unscrew without more force than I dare give it. (I'm trying to turn it counter-clockwise, by the way. Is that correct?) I'm afraid of kinking the copper pipe inside the house and...

Hose bib [ 1 Answers ]

I have a soderd hose bib coming off a tee from the main out front - how do I replace it?

Hose bib question "prier" brand [ 5 Answers ]

I've got a leaky hose bib that says PRIER on the body of the bib. I'm guessing PRIER is the name of the company that made it. It is a frost proof bib and it leaks only when it is turned on. It leaks around where the stem (part with the handle on it) screws into the bib body (part that is...

View more Plumbing questions Search