I have a Aqua Air Model V60 pressure tank. When water is used, the pump runs and after it stops, water comes out of the safety valve (about half a cup). The pressure gauge above the safety valve shows 62 psi. Tank is showing 44 psi. Do I need to replace the safety valve?

We have a 25 gal pressure tank and it blows through the switches. We just replaced the switch and the gage, pump is working great. There is a faucet directly across from the tank and if you turn it on you get great pressure out of it but if you go in the house you can barely get a dribble. The gage...

I have a aqua air v45 system. Im reading 50 psi but hardly have any pressure coming out. What can I do

I have water coming out my air valve which generally indicates the bladder is shot correct? However, it appears the tank is not completely full of water as when I tap up the side of it it's clear that the water is not fully up the tank. Obviously I can't get the hose on to see exacty what the...