Ask Experts Questions for FREE Help !
Ask
    saitam666's Avatar
    saitam666 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jul 6, 2010, 09:20 AM
    Fluidmaster toilet fill valve 200 ax water level
    I'm installing a fluidmaster 200ax and lost the installation instructions, can't find them anywhere on the web, I got everything set up, all that is troubling me is adjusting water level, funny the box says "easy water leveling" but I can't find how to make it stop filling.
    KISS's Avatar
    KISS Posts: 12,510, Reputation: 839
    Uber Member
    		  
    #2

    Jul 6, 2010, 11:27 AM

    Did you get the model # wrong. Here are the instructions for a popular fluidmaster product.

    http://www.fluidmaster.com/pdfs/400cs_instructions.pdf
    massplumber2008's Avatar
    massplumber2008 Posts: 12,832, Reputation: 1212
    Senior Plumbing Expert
    		  
    #3

    Jul 6, 2010, 11:35 AM

    Hi Saitam:

    Check out this link for fluidmaster 400 (should be similar to your unit):

    http://www.fluidmaster.com/pdfs/400ak_instructions.pdf

    Look at the picture #26. Here, you will see a CLIP that needs to be squeezed to adjust the height that the float rises. By lowering the clip you will cause the float to raise higher and that will shut the water flow quicker than it is set now. If that fails to fix this, read the instructions and it will show you how to adjust the height of the entire unit. Fine adjustments are doine with the clip or by using a screwdriver at the screw top to adjust the float up or down.

    Let me know how you make out... OK?

    Mark
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Bowl of toilet does not fill to correct level [ 9 Answers ]

I had a new Kohler Memoirs Comfort Height toilet installed a few months ago. It has the new Class 5 flush system. For about the 1st month when I flushed the toilet, the water in the bowl came to the correct level. Now, all of a sudden, it barely has any in the bowl after a flush. I live in a...

Toilet won't fill up unless I turn the water valve off and on [ 6 Answers ]

Like stated in the summary, my toilet tank won't fill up unless I turn off the water valve (beneath the tank) and then turn it back on again. I don't have the ballcock type assembly. I have the 400A type of fill valve. Let me add that right before this started happening, I turned off the main...

No water coming to toilet from wall. Fluidmaster okay. [ 2 Answers ]

Yesterday, irrigation repair man turned off water to home. Afterwards, upstairs toilet would not fill with water. Detached metal flex tube to tank and turned on water @the wall. Still, no water came out. Sinks and shower working fine in that bathroom.

Fluidmaster 400 fill valve seals [ 4 Answers ]

Do any of you guys ever see the fill valve seals for the Fluidmaster 400 ballcock. I can't find them in my area and I need a half dozen or so.

Replaced Fill Valve and Flapper - Now Bowl Water Level Is Lower [ 6 Answers ]

I recently replaced both my toilets' fill valves and flappers to resolve some running water/leaking issues - which was fixed on both toilets. The toilets are Kohler 1.6 gpf models. But now my problem is that the bowl water fill level is about an inch lower than it used to be. As soon as the...

View more questions Search