Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
How to bleed a propane furnace after tank runs empty
[ 3 Answers ]
I believe I need to bleed the propane line to my furnace. The propane tank ran empty and the furnace lit only briefly right after the tank was refilled. (It's possible that the propane tech and I were both mistaken and we just heard the fan and not the burner.) But I can't find where to bleed...
The pressure tank is empty on well and pump is running
[ 4 Answers ]
Our water shot of the other night. I went out to check the well. The pressure tank is empty. The pressure gage reads 0. the pump turns on every few minutes and pumps about a cup of water. The well materiels all look new. I don't see any out ward damage to anythig. Thanks...
Pressure tank seems empty of water after installing new one
[ 5 Answers ]
After installing a new pressure tank, pressure switch, plumbing and setting tank pressure and cut-in and cut out, the tank seems to be very light, (no or little water in tank). Shouldn't the tank be heavy from being half full with water (draw-down amount)? Thanks! Cliff
Small tank in loft empty
[ 2 Answers ]
Hi, A radiator began leaking a few weeks ago so I switched it off and left it because I was going away. When I went away I switched the Central Heating off and now I'm back, it won't work, the central heating I mean. Won't fire up. To tell the truth last night it did work - but something is...
Small tank in loft empty
[ 3 Answers ]
Is your system a two pipe or one pipe system? A two pipe system has a hot supply which feeds the radiator, and the cold goes back to the boiler. A single pipe system feeds through each radiator in a series. Turning off one radiator in such a system will defeat the whole zone. If it is a... View more questions Search
|