Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Water Softener Location
[ 8 Answers ]
I am looking to do the plumbing for a water softener. The primary artery of the plumbing is a 1" copper pipe... the issue I am having with the location of the softener is that I would need to run about 10 ft of piping tapped into the main artery just to get the unsoftened water to the softener and...
Water softener sanitization
[ 1 Answers ]
I have an opportunity to get a culligan mark 10 water softener from a friend. It has not been in use for a couple of years and has standing water present in both the brine tank and the resin chamber. I know I can get the brine tank cleaned and sanitized. The concern I have is the resin...
Water Softener for whole house
[ 8 Answers ]
Hello, The plumbing set up in my house does not have a loop for a softener. So from what I have been told I would have to have softened water running throughout my house, kitchen included. (unless I spend a fortune to get plumbing redone) Is this a bad idea? Can anyone give me any advice...
Dirty Water Softener
[ 2 Answers ]
Whoever installed the water softener in my house (done with the previous owner) obviously wasn't the sharpest knife in the kitchen because they installed the sediment filter AFTER the water softener (I'm on a dug well with quite a bit of sediment coming through the pipes). Needless to say my water...
Culligan whole house water filter
[ 2 Answers ]
Found one at Ace Hardware. Any suggestions on any other stores that I would find this whole house water filter at? Doing a comparison shop so I can get the best price to have my neighbor install it in 1 month. View more questions Search
|