Hi all, Unsuccessfully tried to cap a copper water line by soldering a pre-soldered cap onto the end. Took all the proper steps, cleaned the ends of the pipe and fitting first, then applied flux around both. Wasn't quite sure what I should be heating, so I just heated everything. After my first...

I recently had a shower replaced by a local contractor. He installed a PVC pan to my old copper drain. Needless to say it leaks. He doesn't understand why? I believe that the correct way should have been to cut the copper drain and install a PVC pipe to the shower. Can someone help explain...

I just moved into a newly constructed townhome and the a/c units are of course new. The A/c is not cooling at all. The machine inside turns on as well as the one outside. The inside A/C makes a strange sucking sound kind of like if you were sipping something out of a cup with a straw and you ran...

A year ago I had a crack and leak in our PVC waste pipe just behind our family room wall close to the first story floor. The plumber opened up the drywall and cut out the cracked portion (2 feet) which exended from just behind the family room wall down to the basement and replaced it with a new...

Parents moved into new ranch style house, and bought new washer/dryer. Drain for washer is what looks like a 1" copper stub with a 3/4" conversion fitting on it. Its about 6" off the ground. plastic bendable hose drain for washer has a rubber gasket-type fitting around it which fits in 2" PVC...