Ask Experts Questions for FREE Help !
Ask
    CJAdams's Avatar
    CJAdams Posts: 9, Reputation: 1
    New Member
     
    #1

    Feb 16, 2006, 09:47 AM
    Convert shower to soaking tub?
    I have 2 bathrooms, both with showers, and no room to convert either one into a tub. So I thought about building up the wall on one and converting it to a soaking tub. The shower is square with 3-sides wall, ceramic tile. The new wall would be built onto the front with maybe a low seat added inside and a step added outside. Any advice? How would I plug the shower drain?
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
     
    #2

    Feb 16, 2006, 10:19 AM
    Quote Originally Posted by CJAdams
    I have 2 bathrooms, both with showers, and no room to convert either one into a tub. So I thought about building up the wall on one and converting it to a soaking tub. The shower is square with 3-sides wall, ceramic tile. The new wall would be built onto the front with maybe a low seat added inside and a step added outside. Any advice? How would I plug the shower drain?
    It's not the tub stopper I would worry about. This would do the job very well. Click on, http://www.shopfosters.com/GOOD-GRIP...er-p-1499.html
    Since the lip of the shower pan only extends up 6 to8 inches how do you plan on containing the water over that level without tearing out the entire shower and building a new shower pan up as high as you wish in your soaking tub? I'll wait on your answer. Tom
    CJAdams's Avatar
    CJAdams Posts: 9, Reputation: 1
    New Member
     
    #3

    Feb 16, 2006, 11:16 AM
    Thanks for the drain stopper link.
    Yes the lip of the shower today is about 6". I was going to extend that 6" wall up to about 30" or so, then cover with tile. The current shower is 3 walls in a U-shape so the extension would be secure between the 2 side walls. The pan is not fiberglass; not sure what but like concrete.
    I don't know what material to use for the extension... probably build a frame and fill will mortar/concrete? That would be my next question.
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
     
    #4

    Feb 16, 2006, 11:53 AM
    CJ,
    Shower pans are supposed to be seamless all the way up. How do you plan on addressing this? Tom
    CJAdams's Avatar
    CJAdams Posts: 9, Reputation: 1
    New Member
     
    #5

    Feb 16, 2006, 12:54 PM
    Well, it wouldn't be seamless. When you say "supposed to be" is that because of code issues or because there is no way to keep water from seeping through if it isn't seamless?
    I was hoping that the new extension wall would be along the same principle as the other 3 walls... build the wall, attach the tile, grout well, etc.
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
     
    #6

    Feb 16, 2006, 01:08 PM
    Quote Originally Posted by CJAdams
    Well, it wouldn't be seamless. When you say "supposed to be" is that because of code issues or because there is no way to keep water from seeping thru if it isn't seamless?
    I was hoping that the new extension wall would be along the same principle as the other 3 walls ... build the wall, attach the tile, grout well, etc.
    CJ,
    There's a lot of difference between containing the splash from a shower head and containing a tub full of water. You were just hoping the three existing tile walls would contain the water that you fill the tub with? Am I missing something here? Regards, tom
    hhansma's Avatar
    hhansma Posts: 1, Reputation: 1
    New Member
     
    #7

    Aug 29, 2007, 10:57 PM
    Quote Originally Posted by CJAdams
    I have 2 bathrooms, both with showers, and no room to convert either one into a tub. So I thought about building up the wall on one and converting it to a soaking tub. The shower is square with 3-sides wall, ceramic tile. The new wall would be built onto the front with maybe a low seat added inside and a step added outside. Any advice? How would I plug the shower drain?
    I'm asking the same question - how to adapt my stall shower to a soaking tub. Worrying about the shower pan, I'm wondering about just lining the bottom couple feet of the shower stall with heavy plastic sheeting and putting something like a sheet of thick plexiglass over the door opening to keep the water-filled plastic from pushing the door open. It would be makeshift but perhaps do the job. I'm thinking of cutting a hole in the plastic over the drain and putting a flat rubber 'stopper' over the hole. The plastic would just be a big square, folded down into the shower stall. Thanks for input!
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
     
    #8

    Aug 30, 2007, 07:26 AM
    Quote Originally Posted by hhansma
    I'm asking the same question - how to adapt my stall shower to a soaking tub. Worrying about the shower pan, I'm wondering about just lining the bottom couple feet of the shower stall with heavy plastic sheeting and putting something like a sheet of thick plexiglass over the door opening to keep the water-filled plastic from pushing the door open. It would be makeshift but perhaps do the job. I'm thinking of cutting a hole in the plastic over the drain and putting a flat rubber 'stopper' over the hole. The plastic would just be a big square, folded down into the shower stall. Thanks for input!
    "The plastic would just be a big square, folded down into the shower stall"
    My idea exactly! Using Compaseal Plastic form a seamless square up as high as you wish the tub wall to be with a flange type shower strainer,(see image) for a drain.
    You may then mud and tile the tub in. Works for me! Works for you? Regards, Tom
    bacobampense's Avatar
    bacobampense Posts: 1, Reputation: 1
    New Member
     
    #9

    Oct 16, 2007, 11:53 AM
    Tom:
    I am also interested in doing this, can you give me your expert opinion to my plan?

    I am remodeling the master bathroom on my house it is a 1967 home in phoenix az, the advantages is that I gutted the bathroom, me and the wife are going back and forth she would like a tub, but it only measures 54 inches stud to stud. I prefer shower.
    To install a tub I found a 54 inches tub but I would need to relocate the drain to match.

    I want to make it a soaking tub as I think I could use that once in a while if it was deep enough.

    I plan to leave the drain on its current location, and build a box out of pressure treated plywood. Then cover it with tar paper, using hot tar, on the plywood then tar paper, then hot tar then a layer of the shower plastic I saw a kit on a building supply store.
    Then over that use cement board. And tile over the whole thing.
    (I think I saw something like this on this old house but they were building a planter)

    Do you think this would be sufficient to stop the water from leaking?

    Ah! And one more thing, the reason I am doing this is that the original shower pan failed and it was leaking into the walls.

Not your question? Ask your question View similar questions

 

Add your answer here.


Check out some similar questions!

Convert .MDB to .exe [ 7 Answers ]

access 97 has option to convert .MDB TO .exe now i am using Access 2000 and using access run time please help to find way to convert .MDB to .exe or any other ways

Basement drain convert to shower [ 3 Answers ]

Hi all, I am trying to finish off our basement, and I would like to put a shower in place of a cast iron floor drain. I have 3 pictures of the drain as it is right now. I don't care if I use a fiberglass shower pan or if I make a tile shower pan. The floor is already sloped into the drain, but...

Converting shower to soaking tub [ 3 Answers ]

I have 2 bathrooms, both with showers, and no room to convert either one into a tub. So I thought about building up the wall on one and converting it to a soaking tub. The shower is square with 3-sides wall, ceramic tile. The new wall would be built onto the front with maybe a low seat added...

How to convert .ra to mp3? [ 3 Answers ]

Hi everybody. I am looking for a software to convert my .ra musics to mp3... I've found some "trial version" softwares, each of which has kind of disabilities. I did not find a full version for free. Do you know one? Thx in advance.

Convert nfa to dfa [ 1 Answers ]

Please tell me how to convert nfa to dfa?


View more questions Search