Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Connecting copper to brass
[ 1 Answers ]
I'm remodelling my bathroom and need to connect 1/2" copper to 1" brass pipe, all the brass connections are threaded if I cut a section away for a compression fitting there is not enough 'play' to slide the pipe into the fitting any suggestions.. thanks Andy
Corrosion concern between brass ball valve and galvanized steel pipe
[ 2 Answers ]
Is it going to cause the corrosion when connecting a galvanized steel nipple to a brass ball valve?
A/C not cooling, Small Copper pipe COLD and Large Copper pipe room temp.
[ 4 Answers ]
I just moved into a newly constructed townhome and the a/c units are of course new. The A/c is not cooling at all. The machine inside turns on as well as the one outside. The inside A/C makes a strange sucking sound kind of like if you were sipping something out of a cup with a straw and you ran...
Connecting PVC to Threaded Copper fitting
[ 2 Answers ]
I have a fitting in a wall which began leaking with mold developing on the wall board. When I took out the wall the culprit was a fitting between a female threaded copper fitting and a male PVC fitting in a hot water line. I initially took out the PVC fitting and fitted the joint with a new fitting...
PVC to Copper Pipe
[ 3 Answers ]
I am remodeling a bathroom. The existing drain pipe is 1 1/2" copper tubing. What is the best way to connect a 1 1/2" PVC to 1 1/2" copper tubing? View more questions Search
|