Ask Experts Questions for FREE Help!
  Advanced
Register  |  Log in  
   Ask    
 Answer  
  Help  

Ask QuestionsprogressAnswer QuestionsprogressBuild ReputationprogressBecome an Expert
 
Free Answers in 3 Easy Steps

Register Now
3 Steps

At Ask Me Help Desk you can ask questions in any topic and have them answered for free by our experts. To ask questions or participate in answering them you must register for a free account. By registering you will be able to:
  • Get free answers from experts in any of our 300+ topics.
  • Accept money for answers that you provide.
  • Communicate privately with other members (PM).
  • See fewer ads.

Home > Home & Garden > Plumbing   »   cold water supply pipe under sink won't stop draining

 
Question Tools Search this Question Display Modes
Question
 
 
Old Apr 16, 2008, 07:43 PM
elizabeth17
New Member
elizabeth17 is offline
 
Join Date: Apr 2008
Posts: 6
elizabeth17 See this member's comment history on his/her Profile page.
cold water supply pipe under sink won't stop draining

Hello,
I had a faucet leaking from the spout. I turned off the water at the main line outside my house, turned off the valve stops, and took the stem to Lowe's to replace it. Found out faucet is too old for repair parts. I bought a new faucet, also stainless steel mesh supply lines and new valve stops, as the old ones as well as the copper supply lines were horribly caked with calcium and green. I installed the faucet, the hot water supply line and valve stop, but I am at a standstill after 48 hours---the cold water pipe(from the wall) hasn't finished draining! I rechecked the main line valve, but it is turned all the way off. There are no other shutoff valves(other than for the water heater) other than the ones under the individual sinks. The pipe has drained just over 8 gallons of cold water in the last 48 hours, but it is still coming out at a steady fast drip! Why won't it stop draining, and how can I make it stop? I tried installing the stop valve anyway, but it continued to leak even after installing it. I used the plumber's tape on all screw threads, I have tightened all the other nuts according to the recommendations on each part, so I anticipate some places to leak after I turn the main water line back on, but I can't get to that point until I get that stupid stop valve installed......
Elizabeth

Reply With Quote
 
     

Answers
 
 
Old Apr 18, 2008, 04:35 PM   #11  
elizabeth17
New Member
elizabeth17 is offline
 
Join Date: Apr 2008
Posts: 6
elizabeth17 See this member's comment history on his/her Profile page.
Quote:
Originally Posted by ballengerb1
When I suggested draining the lowest fixture I suspected what KISS also believed, a bad washer in your main shut off. Your description of the nuts and plumbers tape (teflon) made me suspect compression fitting with unnecessary teflon. Looks like KISS gave you a great link. Keep an eye on that drywall, if it got too wet for long it will develop mold. Looks like you are good to go, and showered.

Yes, thank goodness! Thank you for your help, it was most appreciated, and I was surprised to have answers at 11:30pm! I was so grateful! I've recommended this site to my online group, all women!
  Reply With Quote
 
     


Question Tools Search this Question
Search this Question:

Advanced Search
Display Modes

 
Similar Sponsors

Similar Questions
Question Asker Topic Answers Last Post
cold water supply line noises bredin01 Plumbing 10 Oct 23, 2007 06:53 PM
No cold water supply in the bath ninak Plumbing 2 Jun 3, 2007 07:30 PM
Rust stain on cold water supply pipe pallichair1 Plumbing 8 Mar 4, 2007 06:32 PM
No cold water supply to faucet scotterill Plumbing 2 Feb 10, 2007 11:15 AM




Copyright ©2003 - 2007, Ask Me Help Desk.
All times are GMT -8. The time now is 07:28 PM.

Content Relevant URLs by vBSEO 3.0.0 RC6 © 2006, Crawlability, Inc.