I was trying to replace a leaky valve in a price Pfister shower control knob but can't figure out how to remove the old valve. Is there a special tool for this? Thanks
Add your answer here.
Check out some similar questions!
Price Pfister Single-handle kitchen faucet [ 2 Answers ]
I have the faucet and DO NOT use the sprayer. The installer just tied it beneath the sink and I put a hand soap dispenser in the sprayer hole. There is NO WATER PRESSURE. It just dribbles infuriatingly. I found that the little logo button comes off the main chute of the faucet but I don't know...
Price Pfister shower balance valve leaks [ 2 Answers ]
Help, my Price Pfister shower pressure balance valve leaks up through the shower head when turned off. I replaced the cartridge and it still leaks. It almost stops leaking right after a shower, but over a couple hours it drips about once every second. If I turn on another faucet in the house...
Single price pfister stem valve [ 2 Answers ]
I have a Single turn knob for my shower made By Price Pfister. The valve needs replacing. Removing the knob and un-screwing the metal Circular cylinder, Iím left with the stem valve. From the front, It is circular with two tabs, one On top and bottom. With a screw driver from the Back tabs,...
Price Pfister shower [ 2 Answers ]
I purchased a price pfister shower kit and it did not have an installation manual. They are closed today and their website does not have manuals on it. I just need to know how to install the valve. Can some one direct me to a site that will give me that info?
Tub/ shower leaking. Price Pfister valve question. [ 4 Answers ]
Hi! We have an old Price Pfister Tub and shower faucet. It has been dripping for some time now and I would like to replace the whole thing with something newer anyway. If at all possible I would like to do it myself. I have been doing some research and have found that the new OX8 valves have a...
View more questions Search