I have seen a lot of postings regarding the loss of hot water in the shower, but there is also mention about how there is also a loss of pressure, and I haven't experienced this. The shower is a stand alone shower with a single handle that turns counter clockwise from cold to hot. It's a Sterling...

My bathroom was remodeled by a non-pro who put drywall in between the existing tile wall and the new tub surround. Now the cold and hot on/off knobs won't fit because the stems they mount on aren't long enough due to the additional dry wall. Extensions to the stems were suggested, but none could...

My shower has the standard 3 (not sure of brand) valve set up. All of the valve handles are very hard to turn and I am wondering is there a way of loosening any part of the stems to reduce the tension? I am not sure but I think a long time ago I read that when the stems are installed in a closed...

My house is a little over 50 years old. The shower leaks water from the tub faucet when it is set to come from the shower head. Also the water never fully stops leaking even when the knobs are set to off. I think the wahers are old and have read about replacing "seats" online but can't figure it...

In a fiberglass corner shower shell. What I have is an old leaking rusted Shower valve assembly. It leaks from the Shower head that is a hand sprayer with a wall mount from the sprayer. It also leaks around the both the hot and cold water wall mount knobs. The cold water knob the sleeve that...