Ask Experts Questions for FREE Help !
Ask
    Rob6290's Avatar
    Rob6290 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jun 29, 2005, 04:49 AM
    Can't turn off hot water in shower
    How do I get the valve out to replace the washer in a 30 year old house? I thought I could open it all the way and screw it out but it doesn't want to come out. Am I doing it wrong or is there a trick? Don't want to bust the old copper pipe in the wall if I can help it. Thanks!
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
    		  
    #2

    Jun 29, 2005, 06:16 AM
    Quote Originally Posted by Rob6290
    How do I get the valve out to replace the washer in a 30 year old house? I thought I could open it all the way and screw it out but it doesn't want to come out. Am I doing it wrong or is there a trick? Don't want to bust the old copper pipe in the wall if I can help it. Thanks!
    Hey Rob,
    While you didn't say I'm going to assume that your valve has two knobs and not one handle.
    Shut the water off to the valve and remove the knob and chrome cover plate.
    You will see a brass nut, (the bonnet packing nut). Unscrew that nut and back the stem and washer assembly out counterclockwise. You may now replace the washer. Before you reinstall the stem and washer you must check the seat for nicks and rough spots. If you find any you must replace the seat as well. If you don't it will just tear up the washer. Good luck. Tom
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

No hot water in shower but plenty of hot water at sink! [ 14 Answers ]

undefinedundefined Two days ago, both of the showers in my home stop having hot water. I have very hot water in the sinks in the bathrooms. The shower doesn't get but lukewarm. One showe in the spin dial to adjust the temp and turn on the shower. The other is a spin dial for temp and has a facet...

No Hot Water to shower head, but Hot water to the Tub? [ 2 Answers ]

My husband and I just purchased a new house. We have found that the shower pressure in the bathroom is wonderful however once you have set the right temp from the tub spout and switch over to the shower no hot water makes it to the shower head. We can only turn off the cold water completely in...

Shower Diverter - Hot/cold handles hard to turn [ 4 Answers ]

My shower has the standard 3 (not sure of brand) valve set up. All of the valve handles are very hard to turn and I am wondering is there a way of loosening any part of the stems to reduce the tension? I am not sure but I think a long time ago I read that when the stems are installed in a closed...

Mildew smell when I turn on the water [ 3 Answers ]

I am experiencing a mildew smell when I first turn on the water in the tub. Is it possible for mildew to grow inside the pipes? And how do I get rid of it?

Hot water in the shower until shower head installed [ 6 Answers ]

I have hot water in all my other faucets/showers. I also have hot water at the particular shower with the problem as long as a shower head is not installed. When I install the shower head, the water is lukewarm. Any ideas for the source of the problem, and how to fix?

View more questions Search