Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
New hot water heater installed, but no hot water pressure. Plenty of cold water?
[ 11 Answers ]
Hi, I own a small plumbing service and have a problem I've never encountered before. I installed a new top vented gas water heater for a customer. Turned the main back on, bled air out of the lines, etc. Problem is there is no hot water pressure throughout the house. Cold water pressure is fine....
Cold water in hot lines. If I turn the hot water supply off, I still get cold water
[ 1 Answers ]
I recently purchased a rental house. I replaced the hot water heater and shut off valves. With the shutt-off in and out of the tack are closed, I still get cold water from the hot side of all faucets in the house. When valves are open, and temp. Set at very hot, I get semi-hot water.
Hot water in cold pipes and leaking pressure relief.
[ 4 Answers ]
Hello, I have a problem with hot water coming out of the cold water lines. The problem is twofold. I have a recirculation pump that recirculates hot water back to the tank for instant hot water at all taps. About 6 months ago the pressure relief valve started leaking around a gallon of water over 2...
Repipe or reline pipes?
[ 28 Answers ]
I'm a lady who lives alone and knows nothing about plumbing but I've been getting estimates and it's so confusing. I will appreciate any help. My house is 24 years old with galvanized pipes. It's 1300 sq ft. with 2 baths, 1 kitchen sink, washer, and dishwasher. I've had three pin hole leaks in...
Hot water comes out of cold for several seconds how do I trace pipes?
[ 7 Answers ]
When I turn on the cold water in the kitchen sink, the first 30 seconds or so the water is hot. I believe there is a cross connection somewhere. Our home is only 2 years old. No plumbing has been changed since the initial construction. How do I trace the hot and cold water pipes in the basement... View more questions Search
|