Ask Me Help Desk

Ask Me Help Desk (https://www.askmehelpdesk.com/forum.php)
-   Plumbing (https://www.askmehelpdesk.com/forumdisplay.php?f=259)
-   -   Brown Water Coming Out of the Faucets After Water Has Been Shut Off for Awhile (https://www.askmehelpdesk.com/showthread.php?t=331946)

  • Mar 21, 2009, 01:21 AM
    Clough
    Brown Water Coming Out of the Faucets After Water Has Been Shut Off for Awhile
    Hi!

    Is that normal after the water supply has been shut off for a short or long while? Also, is brown water coming out after doing that a sign that there is something wrong with the plumbing system?

    Thanks!
  • Mar 21, 2009, 05:34 AM
    Perito

    It's pretty common. I doubt that there is anything wrong.
  • Mar 21, 2009, 07:38 AM
    speedball1
    Quote:

    Originally Posted by Clough View Post
    Hi!

    Is that normal after the water supply has been shut off for a short or long while? Also, is brown water coming out after doing that a sign that there is something wrong with the plumbing system?

    Thanks!

    I disagree with Pento. Brown water indicates iron oxide,(rust) in your system and that just ain't normal. Before I can answer I need more information. Pump or city water? Type of piping? Plastic, copper or galvanized? Age of the house? Both hot and cold brown or just one of them? How long do you hafta run the water before it runs clear? Answer me and I'll answer you. Tom
  • Mar 21, 2009, 02:23 PM
    Clough

    Hi, Tom!

    It's city water.

    Pipes are a combination of galvanized and copper at my home. Where I'm house and dog-sitting right now, the pipes are galvanized, copper and plastic. My home is really old, where I'm at right now, the home is around, I think, 40 years old and in an upscale neighborhood and the water was off for about 30 minutes last night. Don't know the cause of it being shut off.

    At my home, both hot and cold are brown. Here, if I recall correctly, it appeared to be just the cold water that was brown.

    At my home, I have to run the water for about 10 minutes before it will be clear. At this home, it only took a few minutes for the water to be clear again.

    Thanks!
  • Mar 21, 2009, 03:23 PM
    speedball1
    Here's your culprit, (see images). This is what happens to galvanized pipe over the years. What's happening is that between draws the water in the pipe will absorb some of the rust. When you run the water it will flush the rust out and the water will run clear. The solution is a repipe job. No instant fix here. Sorry I couldn't have more helpful. Regards, tom
  • Mar 21, 2009, 03:34 PM
    Perito
    Plumbing systems that mix Galvanized with copper (usually for historic reasons) are bad news. The iron dissolves and the copper causes an acceleration of the iron corrosion.

    Having to wait for 10 minutes for the water to clear is excessive and I have to agree with speedball1 that it is a problem -- especially from hearing your description.

    I have seen pipes that are clogged from iron and scale that have to be replaced throughout the house. This can be pretty costly.
  • Mar 21, 2009, 10:15 PM
    afaroo

    I agree with Tom, 40 years old house with a combination of galvanized and copper, will have Build up of rust inside the only solution is a repipe job, good luck.

    John

  • All times are GMT -7. The time now is 03:58 AM.