Ask Experts Questions for FREE Help !
Ask

broken drain acces plug

Asked Jun 18, 2012, 07:55 PM — 3 Answers
I have an old cast iron drain plug I was trying to remove. When I attached a wrench to the square to twist it off it broke off. The plug is still sealed and I am not really sure on how to get it off. I am wondering if I hit it in the center several times I can break it up or will the surrounding pipe break to.

Search this Thread
Share |
3 Answers
massplumber2008's Avatar
massplumber2008 Posts: 10,568, Reputation: 5097
Plumbing Expert
  
#2

Jun 19, 2012, 04:38 PM


Cut a cross across the hole in the plug using a sawzall with a bimetal blade and then cave the plug in...should come out pretty easily after that.

Come close to the threads of the cast iron with your cuts, but do not cut into them...

Mark
Helpful
ihaterentals's Avatar
ihaterentals Posts: 2, Reputation: 1
New Member
  
#3

Jun 19, 2012, 04:56 PM
[quote=massplumber2008;3159752]Cut a cross across the hole in the plug using a sawzall with a bimetal blade and then cave the plug in...should come out pretty easily after that.

Come close to the threads of the cast iron with your cuts, but do not cut into them...

Mark[/QUOTE

Thanks alot. I will do it shouldn't be to hard. After pulling a spoon from the toilet and 16 q tips from the tub, and explaining to people that toilets are not disposals. I did look at it a little more and realized its brass but shouldn't change things. People don't care to much when its not theirs.
Helpful
massplumber2008's Avatar
massplumber2008 Posts: 10,568, Reputation: 5097
Plumbing Expert
  
#4

Jun 19, 2012, 06:47 PM


Quick visual...
Attached Images
 
Helpful
Not your question? Ask your question View similar questions
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Add your answer here.

Remove Text Formatting
 

Undo
Redo
  
Decrease Size
Increase Size
Bold
Italic
Underline
Align Left
Align Center
Align Right
Ordered List
Unordered List
Decrease Indent
Increase Indent
Insert Email Link
Wrap [QUOTE] tags around selected text
Wrap [CODE] tags around selected text
Wrap [HTML] tags around selected text
Wrap [PHP] tags around selected text
Wrap [YOUTUBE] tags around selected text
Notification Type:



Check out some similar questions!

Broken spark plug stuck in heads [ 3 Answers ]

Spark plug snapped off in the head of my 93 honda d15b7 1.5 liter engine how do I fix without replacing the heads

Removing the drain plug [ 2 Answers ]

We have a relatively new American Standard faucet assembly. I need to remove the drain plug to dclean out hair and the like. This assembly isn't like the old ones I've used in the past where it's like a lever assembly that lifts and lowers the drain plug. Those you could remove with a quarter...

How to take off a drain plug? [ 2 Answers ]

I can not figure out how to take off the drain plug to my bath tub. My tub is draining really really really slow and I'm not sure if I snake it that i'll be able to pull out whatever is blocking it......please help.

Tub Drain Plug [ 10 Answers ]

For the life of me, I can't figure out how to close the plug on my tub drain. I'm sure it plugs up, because I've done it before. The setup is as follows: single handle faucet; no shower nozzle; for tub use only; no lever to move the plug up/down. I can remove the chrome plug by...

Toilet Drain Plug? [ 1 Answers ]

I have a toilet in my basement(below ground level, that I might replace in the future, but is loose. After a recent heavy rain, when we ran the washing machine, water came from the bottom of the toilet and flooded the basement floor. Would a plug in the drian hole solve this, or do I have to reseal...

View more Plumbing questions Search