Add your answer here.
Check out some similar questions!
Solder fittings to Type M copper [ 1 Answers ]
What challenges do I face if my existing plumbing is Type M? Existing copper is 35+ years old. I purchased Type L copper lines. I don't think my fittings were typed.
If I solder a small copper fitting will the heat melt the existing joints? [ 2 Answers ]
I am new to soldering and am wondering if I solder to a fitting with an existing soldered joint will the heat re-melt the solder in the first joint?
Changing wiring to use "second line" rather than "first" line on specific jack [ 9 Answers ]
Hi, and thanks! I have two phone lines (telephone numbers) coming into the house. I want to change a particular jack from one line to the other (exclusively for a fax). The current jack has a pair of tan wires going to "black (heavier wire and screw)", a pair of blue wires going to "red", a pair...
Loud Bangs Coming from PVC waste pipe and Hot Water Copper Line [ 6 Answers ]
A year ago I had a crack and leak in our PVC waste pipe just behind our family room wall close to the first story floor. The plumber opened up the drywall and cut out the cracked portion (2 feet) which exended from just behind the family room wall down to the basement and replaced it with a new...
Periodic "gushing" noise in main water line [ 1 Answers ]
In my basement, the main water line comes in through one of the basement walls. I don't think I've heard this before, but periodically, I hear water rushing noises coming from the line. When I go down to the basement, it's like water is rushing in, stopping, then rushing in, etc... Could be...
View more Plumbing questions Search