Ask Experts Questions for FREE Help !
Ask
    gjs71356's Avatar
    gjs71356 Posts: 1, Reputation: 1
    New Member
     
    #1

    Sep 24, 2010, 07:16 PM
    Aquasource faucet
    I bought mode; #HS8076AB-06 faucet and the instruction show to take the metal treaded pipe loose from the handles to put them up through the vanity top but I can't get them to come apart... Help
    massplumber2008's Avatar
    massplumber2008 Posts: 12,832, Reputation: 1212
    Senior Plumbing Expert
     
    #2

    Sep 25, 2010, 05:42 AM

    Hi Gjs71356...

    Is this your faucet... below?

    If so, and I can't be 100% sure here, but if there is no allen screw associated with the handle then the body of the handle should simply SPIN off the valve assembly.

    Hold the valve assembly in your hand and spin the handle counterclockwise to remove.

    Let me know more, OK?

    Mark
    Attached Images
     
    Skis46's Avatar
    Skis46 Posts: 1, Reputation: 1
    New Member
     
    #3

    Feb 7, 2011, 03:44 PM
    #HS8076AB-06 faucet the instruction show to take what appear to be pins with an O ring. I used cloth covered linemens pliers. CW CCW no movement on either side. Has me puzzled?

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Aquasource faucet help [ 1 Answers ]

I purchased a single handle shower only faucet # 873-4704. What I need is a tub and shower faucet # 873-4604. Is there any way to convert the shower only valve to a tub and shower valve without cutting into the tiled wall?

Aquasource model #: 2098500701 [ 0 Answers ]

Bought an aqua source shower set 2098500701 at Lowe's I've hooked this style up before but for some reason the water is trickling out I took the valve out and water shoots out so I thought it was bad and bought another still doing it no pressure took the valve apart and nothing. I know it has to...

Is Aquasource a reliable faucet? Should I pay more and go with a Delta? [ 1 Answers ]

I am replacing a single handle shower and tub faucet. One salesman recommended a cheaper AquaSource set while another said not to use that brand but go with a Delta set that costs about twice as much. I hate to put cheaper AquaSource faucet in and then have it go bad.

After shutting off the main line to fix a faucet, another faucet started running slow [ 3 Answers ]

I shut off the main line to fix the tub faucet. When I turned the main line back on the sink, in the same bathroom, had low water pressure. This wasn't the case prior to the job. It's very cold now so I thought perhaps a water line was frozen, however, every other faucet in the house is running...

Low hot water pressure from kichen faucet only- 1 handle faucet [ 7 Answers ]

Hi. My question is similar to one asked a few posts ago except this is a 1 handle faucet. I plan on maintaining the boiler from now on but I have to fix the flow problem first. I disconnected the hot water supply line to the faucet and the pressure is excellent so I assume the problem is in the...


View more questions Search