Add your answer here.
Check out some similar questions!
Adding pex tubing to copper [ 4 Answers ]
Hi, I want use pex tubing to work around a difficult area in my bathroom tub. My plan was to cut the copper pipe add shut off valves and the pex tubing using compression fittings. Is this okay. I m not much for sweating pipes in a small access space. Thanks -Gerry
Adding a toilet /2nd floor/into exsisting main stack [ 1 Answers ]
Have an older home (late 19th century) wanting to add a bathroom to the 2nd floor. There is a exposed main vent stack(4") and I want to tie into it with PVC. How can I properly remove the connection joint without destroying the cast pipe?
Adding can lights to an exsisting circuit [ 1 Answers ]
When I built my house 4 years ago I did not put cans above my bar. My wife is now thinking that we should do that. I want to tie into an exsisting light above the sink. I am wondering if I can just run wire from that light, to can 1, then to can 2. Connecting whites to whites, black to black,...
Using pex and copper [ 3 Answers ]
We are redoing the majority of the supply in a house we are remodeling. Is there any code or standard on using pex when attaching the water heater. The supply comes in the house as copper. Can we convert it after the meter to pex or do we have to wait until after the water heater? If so, how far...
Pex to copper [ 2 Answers ]
I am going to have a humidifer installed on my furnace. The house is plumbed with Pex through out. I assumed that there would be a short piece of copper coming from the water heater, but there is not. I need a short piece of copper to mount a Saddle valve on to supply the water to the humidifer. I...
View more Plumbing questions Search