# A load is pulled along horizontal ground for a distance of 76m. Using a rope.

The rope is inclined at 5 degrees above the horizontal and the tension in the rope is 65N.
A) Find the work done by the tension.

 Unknown008 Posts: 8,147, Reputation: 3745 Uber Member #2 Sep 28, 2011, 11:41 PM
What is your work concerning the problem? What is the definition of Work Done?

## Check out some similar questions!

Dia -20 mm Minimum breaking load - 279 kn . Tensile grade - 1960 n/mm2 Factor of safety - 5 Construction - 6*36 How much wire rope take load in kg or ton? With example explain?

What is the distance between two pipes for geo thermal horizontal ground loop system.One company tells me 12" apart is a OK but another company tells me that Code asks for pipes to be 24" apart.This installation is to be done in Ontario,Canada. Thanks

12 mm dia wire ropeway fixed at a distance of 1000 meter at both the end and it is fixed at a 45 degreeand arround 150 kg weight is moving on it. How can calculate the wind load?

What is the percentage of the total load of a loaded grab acting on holding rope & opening and closing rope of a 4 rope grab of a particular capacity used for designing the rope size

Horizontal distance [ 1 Answers ]

A log is floating on swiftly moving water. A stone is dropped from rest from 73.4-m high bridge and lands on the log as it passes under the bridge. If the log moves with a constant speed of 5.57 m/s, what is the horizontal distance between the log and the bridge when the stone is released?