Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Replace valve
[ 10 Answers ]
I want to replace the cold valve in the loft water tank. I can undo all the connecting nuts except the flange nut that holds the valve to the galvanised water tank. The nut is narrow and extremely soft brass. Having tried various adjustable spanners, I have come to the conclusion to cut it...
Can I replace gas valve with universal valve?
[ 3 Answers ]
I have an older Carrier natural gas furnace (1970s). Pilot doesn't stay lit. New thermocouple didn't help. Repair man says I need a new gas valve, $700 plus install, suggests replace entire furnace. Can I replace valve with universal valve and save $$?
Should I replace my gas valve?
[ 1 Answers ]
My Trane XV-90 is not heating on its own. When a thermostat calls for heat it goes through the following cycle: Combustion Blower Starts Igniter starts to glow I hear a click The igniter turns off after about 15 to 20 seconds The Combustion Blower Stops The Combustion Blower Starts The...
How to replace shower valve
[ 1 Answers ]
I just recently had a shower only valve replaced. A ceramic tile had to be removed to get to the part and then repaced. I was charged for 6 hours of labor. Is this really how long it takes to do this job? Thank you, lo
How do I replace a valve in my shower?
[ 1 Answers ]
I have a hot water leak in my shower/tubs faucet, I believe its due to a faulty valve. As Im looking at the valve (minus the knob & cover) Im wondering how Im going to get this valve out, I can not get a wrench in the wall, & I don't have socket long enough to clear the shaft that the knob mounts... View more questions Search
|